|
|
Now ON SALE: Save 20%
4 Piece Metalworking Set is a must have for anyone working on metal projects that require drilling, chiseling, punching and mounting hardware! All tools are Professional Mechanics Grade Quality and can deliver 3,500 PSI on the intended target.
SET INCLUDES
High Speed Steel Center Punch
Combo Prick Punch/Center Punch
Self-Centering Center Punch
5/16" Cold Steel Chisel
all in a Hard Storage Case.
|
38.00 |
|
|
7 title Fournier METAL SHAPING DVD SET
SET INCLUDES:
Metal Shaping: Blocking & Smoothing, 90 min.
How To Gas-Weld Aluminum, 60 min.
Bucks, Patterns & Forms, 60 min.
Hand Tools, 90 min.
Large Equipment, 90 min.
Hammerforming Techniques, 76 min. with Ron Covell and Ron Fournier
Motorcycle Metal Fabrication (2-dvd set), 105 min.
Special price $199!
That's 25% savings on more than 9 hours of high-quality Metal Work Instruction & Demonstration!
|
199.00 |
|
|
Our EDGING anvil is perfect for surface clean up. Use this optional anvil for a professional final finish to remove dents or low spots directly next to an angle that has already been bent.
Makes an otherwise tricky job a snap! It's a great choice for important secondary operations that make the difference between getting that special project 'done' and 'done right'!
Edging anvil has an offset 3/4" wide flat surface with 1/16" rad. corners. Overall size is 2" wide x 3" in diameter with pressed-in sealed bearings and a ½" steel axle.
Note: Compatible with Fournier QuickShaper & QuickShaper Mark II English wheels
MADE IN USA
|
105.00 |
|
|
Our DEEP REACH anvil is perfect for wheeling in confined areas! Also especially helpful for for making small shapes, such as the tight end of a tear drop blister. It's also great for turning an edge.
Makes an otherwise tricky job a snap! It's a great choice for important secondary operations that make the difference between getting that special project 'done' and 'done right'!
Overall size is 2" wide x 3-½" in diameter with a raised 3/4" rad. center section. The shoulder dia. is 1-5/8" to allow maximum clearance. Anvil has pressed-in sealed bearings and a ½" steel axle.
Note: Compatible with Fournier QuickShaper & QuickShaper Mark II
MADE IN USA
|
105.00 |
|
|
MIG Welding is widely used, but few people really understand how each of the variables affects the finished weld. This program can be easily understood by a beginner, but it covers information even seasoned professionals can learn from. Ron Covell goes through the entire process step-by-step, and gives clear descriptions of how each factor affects the weld, including wire speed, voltage, stickout, gun angle, travel speed, and gas flow. He also covers plug welds, patch panels, welding aluminum, and using flux core wire.
You’ll especially enjoy the special bonus section on Plasma Cutting!
70 minute DVD, # 1000-22
|
40.00 |
|
|
Planishing hammers are a real 'workhorse' of the metal shaping process. They are unexcelled for flattening welds, working in constricted areas, and stretching flanges. Ron demonstrates the basic procedures for using these machines, including proper die selection and operator technique, and he shows their use on both steel and aluminum panels.
More specialized techniques are covered too, including flanging, riveting, and making reverse curves. This program shows seven different planishing hammers in action, from bargain-priced entry-level machines, through vintage and hand-held machines, to the most robust professional-level machines available, giving the viewer invaluable insight about the great diversity of these machines, and which features are most important for specific types of work.
As popular as planishing hammers are, there is precious little information available on their proper use, and this program will give you a strong foundation for selecting and using the right machine and tooling for your application.
54 min., #1000-29
|
40.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed.
These can also be used as regular hole punches by not using the flare forming ring.
Anti-friction bearings are included with purchase.
AUTOMOTIVE PUNCH & BEAD TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
MADE IN THE USA
|
720.00 |
|
|
This "dolly" shot bag is great for repairing aluminum bodies or components. We like it because it so portable and leaves your metal mark-free!
Made of top-grade leather hides. Each bag is double stitched and has a leather binding around the edge. A velcro closure system is used to retain sand or shot.
Please note:
Bags come unfilled. We recommend filling with #9 lead bird shot, available at most sporting goods stores.
|
19.99 |
|
|
This heavy-duty barrel mallet is perfect for big forming jobs. You can easily customize the large forming surface to speed up the blocking process.
Dimensions are:
Face dia.: 3"
Head length: 6"
Weight: 27 oz.
Barrel shape (flat ends on mallet heads)
|
38.00 |
|
| |
|