|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
Metal Finishing
Weld finishing and final planishing are achieved with some of the metal working "tools of the trade"
|
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Ron Covell demonstrates dozens of ways to work with tubing, including bending with heat, bending with tube bending machines (both inexpensive and high-end machines), mitering, flaring and tapering tubing.
An extensive section deals with using U-bends, showing how to create anything from simple water pipes to elaborate headers.
One of Ron's most popular videos ~ great information communicated concisely with lots of close up shots!
DVD, 95 min., #WTV01 (1000-4)
|
40.00 |
|
|
Now ON SALE: Save 20%
4 Piece Metalworking Set is a must have for anyone working on metal projects that require drilling, chiseling, punching and mounting hardware! All tools are Professional Mechanics Grade Quality and can deliver 3,500 PSI on the intended target.
SET INCLUDES
High Speed Steel Center Punch
Combo Prick Punch/Center Punch
Self-Centering Center Punch
5/16" Cold Steel Chisel
all in a Hard Storage Case.
|
38.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
ONE SIZE: 1-1/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1-3/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
7 title Fournier METAL SHAPING DVD SET
SET INCLUDES:
Metal Shaping: Blocking & Smoothing, 90 min.
How To Gas-Weld Aluminum, 60 min.
Bucks, Patterns & Forms, 60 min.
Hand Tools, 90 min.
Large Equipment, 90 min.
Hammerforming Techniques, 76 min. with Ron Covell and Ron Fournier
Motorcycle Metal Fabrication (2-dvd set), 105 min.
Special price $199!
That's 25% savings on more than 9 hours of high-quality Metal Work Instruction & Demonstration!
|
199.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
| |
|