|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
Metal Finishing
Weld finishing and final planishing are achieved with some of the metal working "tools of the trade"
|
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
|
|
|
|
OVAL PUNCH AND FLARE SET
These Mittler Brothers / Jamey Jordan Signature Series Oval Punch & Flare tools can create a unique oval shaped hole, with or without a flare in one easy step. Simply drill two pilot holes using the included template for the alignment pins, then place the tooling and material in a press. These oval punch and flare tools are precision machined from tool steel and heat-treated to a Rockwell hardness of 58 for years of use. They also feature a 16 gauge mild steel maximum capacity.
SPECIFICATIONS:
Finish Hole (inches): 1-¼ x 2, 1-¾ x 2-¾, 2 x 3-¼
Flare Height (inches): 1/4 (approximate)
Construction: heat treated steel
SET INCLUDES:
1-1/4 x 2 inch punch and flare tool
1-3/4 x 2-3/4 inch punch and flare tool
2 x 3-1/4 inch punch and flare tool
Universal press block
Material Thickness Capacity:
Aluminum (.060”)
Mild Steel (.060”)
Stainless Steel (.040”)
MADE IN USA, PART #1320-100
|
1465.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
7 title Fournier METAL SHAPING DVD SET
SET INCLUDES:
Metal Shaping: Blocking & Smoothing, 90 min.
How To Gas-Weld Aluminum, 60 min.
Bucks, Patterns & Forms, 60 min.
Hand Tools, 90 min.
Large Equipment, 90 min.
Hammerforming Techniques, 76 min. with Ron Covell and Ron Fournier
Motorcycle Metal Fabrication (2-dvd set), 105 min.
Special price $199!
That's 25% savings on more than 9 hours of high-quality Metal Work Instruction & Demonstration!
|
199.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
| |
|