|
|
Gas Welding supplies and equipment
Gas-welding (commonly called oxyacetylene welding or oxy-fuel welding) is one of the oldest welding processes, and is the preferred method for joining non-structural aluminum panels.
|
|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
Ron Covell demonstrates dozens of ways to work with tubing, including bending with heat, bending with tube bending machines (both inexpensive and high-end machines), mitering, flaring and tapering tubing.
An extensive section deals with using U-bends, showing how to create anything from simple water pipes to elaborate headers.
One of Ron's most popular videos ~ great information communicated concisely with lots of close up shots!
DVD, 95 min., #WTV01 (1000-4)
|
40.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
ONE SIZE: 1-1/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1-3/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
Allows the user to clearly view the molten pool while welding. Perfect for gas welding and brazing, the SEBRING lens eliminates the orange glare associated with the use of flux and improves visibility ~ which improves the final weld!
|
29.99 |
|
| |
|