|
|
Ron Covell demonstrates dozens of ways to work with tubing, including bending with heat, bending with tube bending machines (both inexpensive and high-end machines), mitering, flaring and tapering tubing.
An extensive section deals with using U-bends, showing how to create anything from simple water pipes to elaborate headers.
One of Ron's most popular videos ~ great information communicated concisely with lots of close up shots!
DVD, 95 min., #WTV01 (1000-4)
|
40.00 |
|
|
Eckold Metal Forming Tools
Eckold tools are available for shrinking, stretching, doming, planishing, flattening, straightening, flanging, notching, punching and edging of sheet metal parts!
|
|
|
ECKOLD POWER FORMER
Eckold delivers once again with an extremely sturdy, durable and highly capable metal forming machine. The KF170PD offers a great deal of precision, versatility and POWER, wrapped in a compact machine.
With a wide range of optional tooling available for shrinking, stretching, notching, planishing and doming this is a great machine everything from new part fabrication and shaping to sensitive final finishing.
Product literature
|
22000.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
4" LOUVER DIE SET
Additional Die Set for Mittler Brothers Louver Press. Includes punch and die only.
MADE IN USA
|
520.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
ONE SIZE: 1-1/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1-3/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
High Throat Variable Speed Bead Roller
Rigid steel frame
4" High Throat Depth for Extra Clearance
Accurately Aligned Shafts
Hardened Drive Gears
Both Shafts Driven
Forward / Reverse Switch
Variable Speed Foot Pedal Operated (included)
Large selection of optional bead roll profiles, available separately
MADE IN USA
|
1050.00 |
|
|
Louver Punch Set - 4" Dome Louver
Additional Die Set for Mittler Brothers Louver Press.
Includes punch assembly only.
MADE IN USA
|
520.00 |
|
|
Now ON SALE: Save 20%
4 Piece Metalworking Set is a must have for anyone working on metal projects that require drilling, chiseling, punching and mounting hardware! All tools are Professional Mechanics Grade Quality and can deliver 3,500 PSI on the intended target.
SET INCLUDES
High Speed Steel Center Punch
Combo Prick Punch/Center Punch
Self-Centering Center Punch
5/16" Cold Steel Chisel
all in a Hard Storage Case.
|
38.00 |
|
| |
|