|
|
12" Round Shot/Sand Bag for Metal Working
Our bags have a suede outer finish and a tanned inner surface for blemish-free metal work. Each bag is double stitched and has leather binding around the edge. A reinforced flap with Velcro closure system is used to retain filler.
A filled shot bag gives you a surface to pound sheet metal into, absorbs the hammer blows and gives smooth results. It's a metal working necessity.
Please note: does not include fill. Bag may be filled with 50 - 55 lbs. of # 9 lead shot or sand. For best results do not over fill the bag.
|
33.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
12" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard:
Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12"
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
950.00 |
|
|
Now through July 31st, purchase a Fournier Mallet Set and receive a
FREE 12" SHOT BAG
Offer applies to FBMSET and FMS01
Just add FREE BONUS to your cart at checkout. Offer valid while supplies last, maximum of 5 free bonus items.
Wishing our metal working friends a safe and Happy 4th of July celebration!
FOURNIER ENTERPRRISES | 800-501-3722 or 586-323-9160
|
|
|
We're pleased to announce our 2016 Workshop schedule, below. Save by enrolling in multiple classes! 5% off any 2 workshops, 10% off any 3
workshops. Enrollment must be received at the same time, for the same person.
Metal Fabrication Workshop
March 21–23, 2016, Mon - Wed
May 23–25, 2016, Mon - Wed
July 24–26, 2016, Sun – Tues {coordinates with July Advanced Workshop}
Aug 15–17, 2016, Mon - Wed
Sept 19–21, 2016, Mon - Wed
Nov 6–8, 2016, Sun – Tues {coordinates with Nov Advanced Workshop}
Enroll
Welding Workshop
March 24, 2016, Thurs
July 27, 2016, Wed
Sept 22, 2016, Thurs
Nov 9, 2016, Wed
Enroll
Advanced Metal Fabrication Workshop
July 28–30, 2016, Th - Sat
Nov 10–12, 2016, T - Sat
Enroll
FOURNIER ENTERPRRISES | 800-501-3722 or 586-323-9160
|
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Made in USA
|
180.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Please note:
If you order optional Foot Operated Shrinker Stand (SSF2005) with this tool, we will not incude handle unless requested at the time of order.
MADE IN THE USA, by LANCASTER
|
180.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
24" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard: Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12".
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
1100.00 |
|
|
The QuickSpaper Mark II combines a 32" throat English wheel with multiple workstations to perform a variety of essential metal shaping tasks!
Multi-Station Work Center designed by Ron Fournier...
The QuickShaper is a multitask metal working machine designed for metal work professionals and hobbyists alike. Ideal for small shops, where space - & time - are at a premium. The QuickShaper™ Mark II combines a 32" throat English wheel, with multiple workstations to perform...
Every essential metal shaping task:
Hammering / Blocking to pre-form custom aluminum or steel parts;
Wheeling and raising metal panels;
Shrinking or stretching;
Planishing - Perfect for small to medium sized parts like motorcycle tanks, hood scoops, fender flares and door skins. Now, even large parts are easily accommodated on this deeper throat wheel!
Every craftsman deserves flexibility and options to enhance creativity...
Our mobile forming center fits comfortably into small workspaces and is easily navigated around the shop. A variety of tasks may be performed right at the work station and the well-planned design provides convenient storage for forming accessories. It includes a generous 32" throat English wheel, and the upper wheel and anvil can be turned 90° to shape larger parts, as needed.
The QuickShaper provides an effective way to quickly form custom shapes in aluminum & steel. It's a multitask tool that enhances productivity for truly professional results!
Features:
32" English wheel ~ foot activated.
The upper portion of the QuickShaper is a 32" throat English wheel with 90 degree rotation feature for shaping larger parts and panels;
Quick release cam mechanism on the upper anvil.
Benefit: when placed back into operating position, the original pressure setting is immediately reestablished for streamlined shaping and efficiency;
6 forming anvils standard for a well equipped English wheel. Anvils are CNC'ed & polished;
Anvil Dimensions:
Each anvil is 2" wide x 2-½" in diameter with pressed-in sealed bearings and a ½" steel axle. Anvils are individually numbered 0 - 5, indicating the amount of crown, as follows:
#0, Completely flat, no crown
#1, 3/4" contact area
#2, 1/2" contact area
#3, 3/8" contact area.
#4, 1/4" contact area
#5, 1/8" contact area
Upper wheel:
The upper wheel is 2" wide x 4-1/2" in diameter. It also has pressed-in sealed bearings and a 1/2" steel axle. This upper wheel comes highly polished (nearly a mirror finish), which will produce parts with a beautiful surface.
Built for longevity and quality results:
Anvils are 8620 steel with deep case harden .015"-.020", 58-60 HRc
Custom lower storage area for extra forming heads, tools and equipment. Storage area accommodates storage of up to six Fournier forming heads around the perimeter of the tray;
Larger storage holes in upper tray to accommodate a variety of hammers & mallets of every size;
QuickShaper design summary:
Multi-Station design for efficient work space use and enhanced productivity;
Designed & manufactured by experts for maximum quality metal shaping results!
Made with pride in the USA;
Delivered assembled (less casters), ready for use.
Also includes EVEN MORE equipment you need for a complete metal shaping station:
Foot operated Lancaster Shrinker with interchangeable Lancaster Stretcher jaw;
Classic Bowl Forming Head;
Shot Bag 12" (unfilled);
2-¾" Plastic Bossing Mallet (# FBM02);
2-¾ Hickory Barrel Mallet (# MUM00);
Hard Wood Flat Slapper w/ leather face (# FFS001);
90 minute instructional DVD, Blocking & Smoothing, by Ron Fournier (# BSD00)
Review Set Up Instructions
WHEN ORDERING, PLEASE NOTE:
This equipment ships via motor freight only. The shipping charge for this item is ESTIMATED to be $300. (for destinations within the continental United States) Actual shipping is based on a variety of factors and will be calculated once your order is placed. Factory charges $50 crate fee, which is noted on the details of your shipping estimate.
You will be contacted with actual shipping prior to shipment and billed for shipping, separately.
QuickShaper Mark II # FQSM2
SHIPS TRUCK FREIGHT, 665 lbs., class 85
Price does not include sales tax, if applicable. (MI residents, 6%)
QuickShaper Mark II # FQSM2
|
5500.00 |
|
|
BENCH MOUNT ENGLISH WHEEL
We are often asked for an affordable bench top wheel, and are pleased to offer this model. It's an affordable version for the home hobbyist or race enthusiast. Perfect for the custom shop in need of an extra shaping station that won't eat up a ton of space. This pre-welded unit arrives painted and completely finished as shown.
26-1/2" overall throat depth
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1680.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
| |
|