|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
MIG Welding is widely used, but few people really understand how each of the variables affects the finished weld. This program can be easily understood by a beginner, but it covers information even seasoned professionals can learn from. Ron Covell goes through the entire process step-by-step, and gives clear descriptions of how each factor affects the weld, including wire speed, voltage, stickout, gun angle, travel speed, and gas flow. He also covers plug welds, patch panels, welding aluminum, and using flux core wire.
You’ll especially enjoy the special bonus section on Plasma Cutting!
70 minute DVD, # 1000-22
|
40.00 |
|
|
This program covers many advanced topics in TIG welding, including welding chrome moly steel, stainless steel, aluminum, magnesium, bronze, copper, and titanium. You’ll also learn how to weld castings made from aluminum, magnesium, and bronze. Clear guidelines are given for using the pulse and waveform adjustments that many new welders have, along with great practical advice on machine setup, joint preparation, and weld finishing.
Ron’s clear and detailed instructions are easy to follow, and the striking close-up photography shows you exactly what to look for as you weld!
111 min., #1000-25
|
40.00 |
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
AMCO 22 brand aluminum welding flux, 8-oz. container. Used for welding aluminum & alloys.
This flux will produce a strong, non-porous weld by keeping the base metal and rod free of oxides during welding. Considered the benchmark industry flux for the welding of aluminum. Conforms to AMS 3414A.
How To Use:
Mix with water to form a paste and apply to both rod and base metal. After welding, remove residue with warm water. Recommended for use with #1100 bare aluminum.
Need a larger container? Also available in 16 oz.
|
25.00 |
|
|
AMCO 22 brand aluminum welding flux, large, 16-oz. container. Used for welding aluminum & alloys.
This flux will produce a strong, non-porous weld by keeping the base metal and rod free of oxides during welding. Considered the benchmark industry flux for the welding of aluminum. Conforms to AMS 3414A.
How To Use:
Mix with water to form a paste and apply to both rod and base metal. After welding, remove residue with warm water. Recommended for use with #1100 bare aluminum.
|
45.00 |
|
|
DHC 2000 Welding & Cutting Torch
This professional torch kit comes with everything needed for welding, brazing and cutting almost any material.
KIT INCLUDES:
DHC2000 torch body
Five welding tips (#0, #.5, #1, #2 and #3)
Tip Cleaner
Wrench
Check valves
Over cutter attachment (The overcutter curves over the welding tip to provide a PULL cut. It is used when cutting mild steel from 1/8″ – 1″. Also includes a guide wheel assembly for a steady hand while making long straight or pattern cuts. The rails can be staggered to perform angle or bevel cuts. They fit both the undercutter and the overcutter.
Under cutter attachment (Undercutter attaches under the welding tip for cutting thin sheet metal. This is generally referred to as a PUSH cut. It is used for cutting 28-16 gage 1/64″ – 1/16″ material.)
Instructional manual
Ron Fournier's "How to Gas Weld Aluminum" DVD!
Manufactured with pride in the USA by Detroit Torch.
Please Note:
Torch kit and accessories are not available for shipment to the following countries: Australia, Sweden, New Zealand. Thank you for your understanding.
Torch kit has AMERICAN threads.
|
450.00 |
|
|
Shop shirts, hats and welding gloves
|
|
|
Available on demand, devoted to YOUR interests or project:
Metal Shaping
Fabrication
Welding Skills
|
|
|
|
|
| |
|