|
|
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed. These can also be used as regular hole punches by not using the flare forming ring. Anti-friction bearings are included with purchase.
PUNCH & BEAD TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4""
2"
2-1/2"
3"
MADE IN THE USA
|
860.00 |
|
|
LOUVER PRESS KIT
KIT INCLUDES:
10-ton hydraulic ram
Precision slide assembly
One set of louver dies included with purchase ( your choice of one 1" - 5", 3" dome or 4" dome )
Blueprints & complete instructions for you to build a 48" throat depth press.
FEATURES:
Punches Steel, Aluminum or Stainless
Punches up to 2" dia. hole
Up to 5" long louvers, depending on your choice of punch at time of purchase.
Optional louver die sets available
Please note: requires either Air Hydraulic Pump w/ 20' Hose or an electric hydraulic pump, each sold separately.
MADE IN USA
|
1815.00 |
|
|
Unwelded Standard Bench Mount English Wheel Kit
Kit Includes all machined parts, cut to length frame material, detailed step by step instructions and blueprints. A great value, especially if you have fabrication skills!
The photo above is Mittler Benchtop wheel that we built for the shop with a custom made stand. We needed an additional wheel that was high quality and didn't take up too much space. If you're looking for the same type of wheel look no further!
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1450.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
Congratulations to our lucky 2015 AutoRama winner, Joe Zidzik of Warren, MI. Joe won a 10-piece metal working tool kit valued at over $400
Thanks to all who entered the raffle!
P 800.501.3722 | fournierenterprises.com
|
|
|
|
|
|
Celebrate with us and enjoy 24% OFF any Fournier Signature Tool. Use code 24years at checkout.
Hurry, offer expires 03/02/15. Not valid on tool kits or sets.
|
|
| |
|