|
|
This lightweight, variable-speed pistol-grip shear cuts 14 gauge C.R. mild steel and most grades of stainless to 16 gauge.
Double-insulated, the 5 AMP KD-440 cuts at over 150 inches per minute. Leaves a clean cut in metal without warping or bending your material. Tool is perfect for one hand accuracy in following a straight line.
If you have attended one of our workshops, you have seen Ron, Dan and Jeff using one of these indispensable shears to cut metal quickly. Again, a Kett shear is great, affordable option to consider if you don't own a drop shear.
Replacement blades available, Kit # KD-106, $45.50
|
270.00 |
|
|
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed.
These can also be used as regular hole punches by not using the flare forming ring.
Anti-friction bearings are included with purchase.
AUTOMOTIVE PUNCH & BEAD TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
MADE IN THE USA
|
720.00 |
|
|
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed. These can also be used as regular hole punches by not using the flare forming ring. Anti-friction bearings are included with purchase.
PUNCH & BEAD TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4""
2"
2-1/2"
3"
MADE IN THE USA
|
860.00 |
|
|
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
|
720.00 |
|
|
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
|
860.00 |
|
|
Unwelded Standard Bench Mount English Wheel Kit
Kit Includes all machined parts, cut to length frame material, detailed step by step instructions and blueprints. A great value, especially if you have fabrication skills!
The photo above is Mittler Benchtop wheel that we built for the shop with a custom made stand. We needed an additional wheel that was high quality and didn't take up too much space. If you're looking for the same type of wheel look no further!
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1450.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
LOUVER PRESS KIT
KIT INCLUDES:
10-ton hydraulic ram
Precision slide assembly
One set of louver dies included with purchase ( your choice of one 1" - 5", 3" dome or 4" dome )
Blueprints & complete instructions for you to build a 48" throat depth press.
FEATURES:
Punches Steel, Aluminum or Stainless
Punches up to 2" dia. hole
Up to 5" long louvers, depending on your choice of punch at time of purchase.
Optional louver die sets available
Please note: requires either Air Hydraulic Pump w/ 20' Hose or an electric hydraulic pump, each sold separately.
MADE IN USA
|
1815.00 |
|
|
Dues to COVID restrictions please call us for wwelding workshop availability in 2021. Apologies for any inconvenience.
WELDING WORKSHOP TUITION
is $350 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $100 deposit will hold your reservation. Balance is due 30 days prior to the workshop.
Select desired Welding Workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include hotel suggestions and a map to assist you with travel plans.
If you choose to make a reservation with a check or money order, the deposit amount is $100 (per person) which is applied to workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $50 refund.
Students must be 18 years of age or older to attend workshops; Full payment must be received 30 days prior to class.
Complete workshop information can be viewed HERE
|
100.00 |
|
|
This program covers many advanced topics in TIG welding, including welding chrome moly steel, stainless steel, aluminum, magnesium, bronze, copper, and titanium. You’ll also learn how to weld castings made from aluminum, magnesium, and bronze. Clear guidelines are given for using the pulse and waveform adjustments that many new welders have, along with great practical advice on machine setup, joint preparation, and weld finishing.
Ron’s clear and detailed instructions are easy to follow, and the striking close-up photography shows you exactly what to look for as you weld!
111 min., #1000-25
|
40.00 |
|
| |
|