|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
ONE SIZE: 1-1/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
|
OVAL PUNCH AND FLARE SET
These Mittler Brothers / Jamey Jordan Signature Series Oval Punch & Flare tools can create a unique oval shaped hole, with or without a flare in one easy step. Simply drill two pilot holes using the included template for the alignment pins, then place the tooling and material in a press. These oval punch and flare tools are precision machined from tool steel and heat-treated to a Rockwell hardness of 58 for years of use. They also feature a 16 gauge mild steel maximum capacity.
SPECIFICATIONS:
Finish Hole (inches): 1-¼ x 2, 1-¾ x 2-¾, 2 x 3-¼
Flare Height (inches): 1/4 (approximate)
Construction: heat treated steel
SET INCLUDES:
1-1/4 x 2 inch punch and flare tool
1-3/4 x 2-3/4 inch punch and flare tool
2 x 3-1/4 inch punch and flare tool
Universal press block
Material Thickness Capacity:
Aluminum (.060”)
Mild Steel (.060”)
Stainless Steel (.040”)
MADE IN USA, PART #1320-100
|
1465.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 3" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
160.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
HEM ROLL, for Mittler Power Drive Bead Rollers
STEP #1 Forms the metal 90 degrees
Add strength and safety to every job with Hem Rolls, a productive addition to your Mittler Brother Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep on steel or aluminum up to .040" without marring pre-painted aluminum. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
100.00 |
|
|
BEAD ROLLER Learning Package
You save 20% on three of our most popular Bead Roller DVDs:
The Art of Bead Rolling, Vol. 1, DVD by Jamey Jordan;
Beading Machine Basics DVD by Ron Covell;
The Art of Bead Rolling, Vol. 2, DVD by Jamey Jordan;
|
76.00 |
|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
|
BOSSING MALLET SET INCLUDES:
Each Bossing Mallet has two radii for added usefulness:
FBM01: Small radius dia: ½", Large radius dia. 2-¼" (shown right)
An elegantly shaped, custom-made tool. Versatile and effective for aluminum and mild steel projects.
FBM02: Small radius dia: ¾", Large radius dia. 1-3/8" (shown middle)
A best seller! Nicely balanced and easy to handle.
FBM03: Small radius dia. 1", Large radius dia. 3" (shown left)
At 26 ounces, this mallet moves metal fast! The heaviest of all our bossing-style mallets, this is a great choice when working with steel.
Pair with the shot bag of your choice for truly professional results!
#FBMSET, MADE IN USA
|
136.00 |
|
|
EDGE BEAD ROLLS, for Mittler Power Drive Bead Rollers
Built in edge guide makes a tough job easier. Designed to roll a strengthening bend around the edge of a panel. Works great for wheel wells too!
We offer a variety of Edge Bead Rolls. Simply choose one at a time from the drop down box below and add to cart. Add as many as you like.
Bead rolls are 2-3/4" ID x 3/4" ID x 1" wide (bead centered on roll width).
MADE IN THE USA
|
70.00 |
|
|
|
|
| |
|