|
|
HEM ROLL, for Mittler Power Drive Bead Rollers
STEP #1 Forms the metal 90 degrees
Add strength and safety to every job with Hem Rolls, a productive addition to your Mittler Brother Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep on steel or aluminum up to .040" without marring pre-painted aluminum. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
100.00 |
|
|
HEM ROLL , for Mittler Power Drive Bead Rollers
STEP #2 Forms the metal to 140 degrees
Add strength and safety to every job with Hem Rolls, a productive addition to your Mittler Brother Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep on steel or aluminum up to .040" without marring pre-painted aluminum. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
100.00 |
|
|
HEM ROLL SET, for Mittler Power Drive Bead Rollers
SET INCLUDES:
STEP #1 Metal is formed 90°
STEP #2 Metal is formed 140°
STEP #3 Metal is rolled flat
Add strength and safety to every job with Hem Rolls, a productive additions to your Mittler Brothers Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
185.00 |
|
|
Our shot bags have a suede outer finish and a tanned inner surface for blemish-free metal work. Each bag is double stitched and has leather binding around the edge. A reinforced flap with Velcro closure system is used to retain filler.
A filled shot bag gives you a surface to pound sheet metal into, absorbs the hammer blows and gives smooth results. It's a metal working necessity.
Please note: does not include fill. Bag may be filled with # 9 lead shot or sand. For best results do not over fill the bag.
|
52.00 |
|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
|
12" Round Shot/Sand Bag for Metal Working
Our bags have a suede outer finish and a tanned inner surface for blemish-free metal work. Each bag is double stitched and has leather binding around the edge. A reinforced flap with Velcro closure system is used to retain filler.
A filled shot bag gives you a surface to pound sheet metal into, absorbs the hammer blows and gives smooth results. It's a metal working necessity.
Please note: does not include fill. Bag may be filled with 50 - 55 lbs. of # 9 lead shot or sand. For best results do not over fill the bag.
|
33.00 |
|
|
A selection of 6 back issues from our remaining stock of Metal Crafter's News.
Metal Crafter's News®, The Journal of Metal Fabrication Published by Ron Fournier
This was a bimonthly magazine created specifically for metal craftsman and automotive enthusiasts in the mid to late 90's. Metal Crafter's News focused on custom metal shaping for the automotive, aircraft and motorcycle industries.
Ron used MCN to share more than 35 years of experience & insight on a variety of topics, including: tips & techniques, craftsman profiles, projects & patterns, new construction, restoration, tool & product reviews and more.
Please note: these have been out of print for quite a few years. We have a remaining surplus of some issues and offer them for those still interested. Please call if you have any questions reagrding availability of a specific issue.
|
20.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
EXTRA LARGE, BY REQUEST!
Stretch metal without nicks or gouges using this top-grade leather bag.
Our bags have a suede outer finish and a tanned inner surface for blemish-free metal work. Each bag is double stitched and has leather binding around the edge. A reinforced flap with Velcro closure system is used to retain filler.
A filled shot bag gives you a surface to pound sheet metal into, absorbs the hammer blows and gives smooth results.
It's a metal working necessity!
Please note: does not include fill. Bag may be filled with # 9 lead shot or sand. For best results do not over fill the bag.
|
65.00 |
|
|
The first step in many large metalshaping projects is building a buck. A buck is a pattern, or form, that captures all of the key dimensions, contours, and details of an object in three-dimensional space. In some cases, details such as flanges and intricate contours are created by hammering metal directly against reinforced portions of the buck. The techniques used to make sophisticated bucks are not widely known, and many people have called us requesting a step-by-step description of the process, using tools the average builder may already have.
You'll learn a fast way to use sheet metal angles to model large, complicated shapes with surprising accuracy, and you will get insight into the way Ron works through the challenges presented by each element of the buck. His detailed, easy-to-follow commentary, coupled with striking close-up photography makes each step easy to follow, and you'll learn how to build sturdy, accurate bucks - the foundation for your large-scale metalshaping projects!
70 min., #1000-28
|
40.00 |
|
| |
|