|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Made in USA
|
180.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Please note:
If you order optional Foot Operated Shrinker Stand (SSF2005) with this tool, we will not incude handle unless requested at the time of order.
MADE IN THE USA, by LANCASTER
|
180.00 |
|
|
A necessity for Metal Workers! Ron's popular follow-up reference book to Metal Fabricator's Handbook.
INSIDE YOU WILL FIND TIPS ON: Setting up your own shop, proper use of the English wheel, basic metal shaping techniques, the art of hammerforming, proper riveting techniques, and tips on restoring original sheet metal.
Fully illustrated how-to sequences are included, along with many photos to develop sheet metal skills.
|
28.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
24" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard: Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12".
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
1100.00 |
|
|
BEAD ROLLER Learning Package
You save 20% on three of our most popular Bead Roller DVDs:
The Art of Bead Rolling, Vol. 1, DVD by Jamey Jordan;
Beading Machine Basics DVD by Ron Covell;
The Art of Bead Rolling, Vol. 2, DVD by Jamey Jordan;
|
76.00 |
|
|
John Glover has done a tremendous job of describing and illustrating techniques refined and perfected over a lifetime of unparalleled metal shaping successes in The Practical Sheet Metal Worker.
The book is divided into sections that include working the edges of metal parts, like beading, forming a wire edge and turning a flange. There is also a wealth of information on shrinking, tucking and heat shrinking. A section on making louvers is particularly helpful. The 'finishing touches' described in the book can enhance any metal shaping project, from basic to very advanced. Happily, John covers metal fabrication details and fine points in true English form - with excellent clarity and exquisite attention to detail.
Antique race cars, motorcycle gas tanks, aircraft parts and many other projects are all covered. Readers will enjoy John's perspective and personal touch along with intriguing information from days gone by. It’s full of valuable information about the hand forming of metal parts used in restoration, prototype, race and custom cars.
|
26.75 |
|
|
Bolts into existing holes on 24" Bead Rollers (210-24, 210-24NV, 210-24M, 202-24, 202-24NV)
Supports Material While You Work
Folds Up & Out Of The Way When Needed
Includes Drill Hole Pattern & Instructions to Drill Support Holes for 36" Bead Rollers (200-36, 200-36NV, 202-36, 202-36NV)
38” L x 20” W
Bead roller and stand NOT included.
|
280.00 |
|
|
What do you do if you have a car with a fender that is damaged beyond repair, or missing? Ron shows how to use the opposite fender to design a buck, pointing out the features required to make a new fender that perfectly mirrors the model. You will see him analyze a '36 Ford fender, determine the number of pieces to make it from, and exactly where to place the seams to accommodate the intricate details, including the running board bulge and the rolled edge of the wheel opening.
A fascinating, in-depth look at the start-to-finish construction of a challenging project!
119 min., #1000-24
|
40.00 |
|
|
1" Round Bead Shape Roll, for Mittler Power Drive Bead Rollers
MADE IN THE USA
|
95.00 |
|
|
EDGE BEAD ROLLS, for Mittler Power Drive Bead Rollers
Built in edge guide makes a tough job easier. Designed to roll a strengthening bend around the edge of a panel. Works great for wheel wells too!
We offer a variety of Edge Bead Rolls. Simply choose one at a time from the drop down box below and add to cart. Add as many as you like.
Bead rolls are 2-3/4" ID x 3/4" ID x 1" wide (bead centered on roll width).
MADE IN THE USA
|
70.00 |
|
| |
|