|
|
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
|
720.00 |
|
|
SET OF 6 LOWER ANVILS #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
Check out the wheel (above) one of our workshop students built using these anvils!
INCLUDES:
2900-A0, FLAT anvil wheel
2900-A1, 12" Rad with 3/4" flat anvil wheel
2900-A2, 8-1/2" Rad with 1/2" flat anvil wheel
2900-A3, 5" Rad with 3/8" flat anvil wheel
2900-A4, 3-1/4" Rad with 1/4" flat anvil wheel
2900-A5, 2-3/8" Rad with 1/8" Flat anvil wheel
SAVE WHEN YOU BUY THE SET OF SIX! (Normally $95 ea.)
Made in USA
|
555.00 |
|
|
BOSSING MALLET SET INCLUDES:
Each Bossing Mallet has two radii for added usefulness:
FBM01: Small radius dia: ½", Large radius dia. 2-¼" (shown right)
An elegantly shaped, custom-made tool. Versatile and effective for aluminum and mild steel projects.
FBM02: Small radius dia: ¾", Large radius dia. 1-3/8" (shown middle)
A best seller! Nicely balanced and easy to handle.
FBM03: Small radius dia. 1", Large radius dia. 3" (shown left)
At 26 ounces, this mallet moves metal fast! The heaviest of all our bossing-style mallets, this is a great choice when working with steel.
Pair with the shot bag of your choice for truly professional results!
#FBMSET, MADE IN USA
|
136.00 |
|
|
A selection of 6 back issues from our remaining stock of Metal Crafter's News.
Metal Crafter's News®, The Journal of Metal Fabrication Published by Ron Fournier
This was a bimonthly magazine created specifically for metal craftsman and automotive enthusiasts in the mid to late 90's. Metal Crafter's News focused on custom metal shaping for the automotive, aircraft and motorcycle industries.
Ron used MCN to share more than 35 years of experience & insight on a variety of topics, including: tips & techniques, craftsman profiles, projects & patterns, new construction, restoration, tool & product reviews and more.
Please note: these have been out of print for quite a few years. We have a remaining surplus of some issues and offer them for those still interested. Please call if you have any questions reagrding availability of a specific issue.
|
20.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1-1/2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
145.00 |
|
|
HEM ROLL SET, for Mittler Power Drive Bead Rollers
SET INCLUDES:
STEP #1 Metal is formed 90°
STEP #2 Metal is formed 140°
STEP #3 Metal is rolled flat
Add strength and safety to every job with Hem Rolls, a productive additions to your Mittler Brothers Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
185.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 2-1/2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
Now in one easy step you can flare sheet metal panels for improved strength & appearance.
Flare Tools Part #: 1300-F-Series
Product Description Flare sheet metal panels for improved strength and appearance.
Flare tool guide ring centers tooling in your pre-cut hole then draw together with supply bolt.
Easily mounts in our Mittler Brothers Bench Presses.
SET OF 9 FLARE TOOLS INCLUDES:
1/2" Flare Tool, Part # 1300-001
5/8" Flare Tool, Part # 1300-002
3/4" Flare Tool, Part # 1300-003
1" Flare Tool, Part # 1300-004
1-1/4" Flare Tool, Part # 1300-005
1-1/2" Flare Tool, Part # 1300-006
1-3/4" Flare Tool, Part # 1300-007
2" Flare Tool, Part # 1300-008
2-1/2" Flare Tool, Part # 1300-009
A $425 VALUE! (Flares may also be purchased individually, please call to order)
MADE IN THE USA
|
370.00 |
|
| |
|