|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
EDGE BEAD ROLLS, for Mittler Power Drive Bead Rollers
Built in edge guide makes a tough job easier. Designed to roll a strengthening bend around the edge of a panel. Works great for wheel wells too!
We offer a variety of Edge Bead Rolls. Simply choose one at a time from the drop down box below and add to cart. Add as many as you like.
Bead rolls are 2-3/4" ID x 3/4" ID x 1" wide (bead centered on roll width).
MADE IN THE USA
|
70.00 |
|
|
HD TUBE BEAD ROLL SET , for Mittler Power Drive Bead Rollers
Rolls a bead so hoses won't slip off
Make professional radiator and fuel line tubes.
Beads 1-¼" dia. tube & larger .
Perfect addition to a Mittler Power Bead Roller. Fits all power drive units.
MADE IN THE USA
|
160.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
A huge variety of bead rolls for use with all standard (1-1/8" throat) Mittler Brothers Bead Rollers! These rolls will fit models #: 210-24, 210-24NV, 200-36, 200-36NV, 200-42 AND 210-24M.
Select options from menu, above. "Standard" shape rolls are $65. Other optional rolls vary, as indicated next to roll description.
All bead rolls are Made in USA
|
75.00 |
|
|
4 INCH THROAT BEAD ROLLS FOR the Mittler Brothers 204-24, 204-24NV, 204-36 and 204-36NV Bead Rollers.
Dozens of shapes available!
Select one at a time from the drop down field and add as many as you like to your cart.
Made in the USA
|
105.00 |
|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
|
Deep Throat Shrinker & Stretcher
A professional quality foot-activated shrinker and stretcher unit. With a 6" throat depth, it makes forming compound panels quick and easy. Shrinker and Stretcher jaws swap out in seconds with the included allen wrench. Works great on sheet metal and aluminum alike. Well designed, this is an high quality tool for the discerning metal worker. Includes a 1 year warranty, even on the shrinker and stretcher jaws!
KSM 155 Shrinker/Stretcher Features
Mild steel capacity 16 gauge
6" deep throat
Quick change jaws included, choose "standard" OR "aluminum" Shrinking and Stretching Jaws. Standard jaws are designed for use on all materials. Aluminum jaws are designed to leave lighter marks than the standard jaws on aluminum
Foot operation to leave hands free to work the material
One year warranty
Wheeled base included to use as freestanding unit
KSM 155 Specifications
Working depth (throat): 6"
Height: 44"
Width: 6.3 "
Overall depth: 30.3"
Weight: 70 lbs.
Note: Ships via motor freight. Shipping charges for this item will NOT be reflected in the shopping cart. You will be contacted with a shipping quote prior to shipment. (Ship weight 110 lbs.)
Made in Sweden
|
3150.00 |
|
|
|
|
| |
|