|
|
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
|
720.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
145.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 2-1/2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 3" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
160.00 |
|
|
Ron Covell demonstrates dozens of ways to work with tubing, including bending with heat, bending with tube bending machines (both inexpensive and high-end machines), mitering, flaring and tapering tubing.
An extensive section deals with using U-bends, showing how to create anything from simple water pipes to elaborate headers.
One of Ron's most popular videos ~ great information communicated concisely with lots of close up shots!
DVD, 95 min., #WTV01 (1000-4)
|
40.00 |
|
|
Accepts any size forming heads or dollies with a shank size up to 1-3/4" x 2-1/2"
Use for metal shaping in combination with slappers and/or hammers;
Convenient storage for assorted tools and accessories.
Please note:
Forming head is NOT included with stand and is shown for illustration purposes.
This item only ships within the Contiguous US. Please do not add to your cart if you are outside of this region. Thank you for your understanding.
|
250.00 |
|
|
BOSSING MALLET SET INCLUDES:
Each Bossing Mallet has two radii for added usefulness:
FBM01: Small radius dia: ½", Large radius dia. 2-¼" (shown right)
An elegantly shaped, custom-made tool. Versatile and effective for aluminum and mild steel projects.
FBM02: Small radius dia: ¾", Large radius dia. 1-3/8" (shown middle)
A best seller! Nicely balanced and easy to handle.
FBM03: Small radius dia. 1", Large radius dia. 3" (shown left)
At 26 ounces, this mallet moves metal fast! The heaviest of all our bossing-style mallets, this is a great choice when working with steel.
Pair with the shot bag of your choice for truly professional results!
#FBMSET, MADE IN USA
|
136.00 |
|
|
Now ON SALE: Save 20%
4 Piece Metalworking Set is a must have for anyone working on metal projects that require drilling, chiseling, punching and mounting hardware! All tools are Professional Mechanics Grade Quality and can deliver 3,500 PSI on the intended target.
SET INCLUDES
High Speed Steel Center Punch
Combo Prick Punch/Center Punch
Self-Centering Center Punch
5/16" Cold Steel Chisel
all in a Hard Storage Case.
|
38.00 |
|
|
The QuickSpaper Mark II combines a 32" throat English wheel with multiple workstations to perform a variety of essential metal shaping tasks!
Multi-Station Work Center designed by Ron Fournier...
The QuickShaper is a multitask metal working machine designed for metal work professionals and hobbyists alike. Ideal for small shops, where space - & time - are at a premium. The QuickShaper™ Mark II combines a 32" throat English wheel, with multiple workstations to perform...
Every essential metal shaping task:
Hammering / Blocking to pre-form custom aluminum or steel parts;
Wheeling and raising metal panels;
Shrinking or stretching;
Planishing - Perfect for small to medium sized parts like motorcycle tanks, hood scoops, fender flares and door skins. Now, even large parts are easily accommodated on this deeper throat wheel!
Every craftsman deserves flexibility and options to enhance creativity...
Our mobile forming center fits comfortably into small workspaces and is easily navigated around the shop. A variety of tasks may be performed right at the work station and the well-planned design provides convenient storage for forming accessories. It includes a generous 32" throat English wheel, and the upper wheel and anvil can be turned 90° to shape larger parts, as needed.
The QuickShaper provides an effective way to quickly form custom shapes in aluminum & steel. It's a multitask tool that enhances productivity for truly professional results!
Features:
32" English wheel ~ foot activated.
The upper portion of the QuickShaper is a 32" throat English wheel with 90 degree rotation feature for shaping larger parts and panels;
Quick release cam mechanism on the upper anvil.
Benefit: when placed back into operating position, the original pressure setting is immediately reestablished for streamlined shaping and efficiency;
6 forming anvils standard for a well equipped English wheel. Anvils are CNC'ed & polished;
Anvil Dimensions:
Each anvil is 2" wide x 2-½" in diameter with pressed-in sealed bearings and a ½" steel axle. Anvils are individually numbered 0 - 5, indicating the amount of crown, as follows:
#0, Completely flat, no crown
#1, 3/4" contact area
#2, 1/2" contact area
#3, 3/8" contact area.
#4, 1/4" contact area
#5, 1/8" contact area
Upper wheel:
The upper wheel is 2" wide x 4-1/2" in diameter. It also has pressed-in sealed bearings and a 1/2" steel axle. This upper wheel comes highly polished (nearly a mirror finish), which will produce parts with a beautiful surface.
Built for longevity and quality results:
Anvils are 8620 steel with deep case harden .015"-.020", 58-60 HRc
Custom lower storage area for extra forming heads, tools and equipment. Storage area accommodates storage of up to six Fournier forming heads around the perimeter of the tray;
Larger storage holes in upper tray to accommodate a variety of hammers & mallets of every size;
QuickShaper design summary:
Multi-Station design for efficient work space use and enhanced productivity;
Designed & manufactured by experts for maximum quality metal shaping results!
Made with pride in the USA;
Delivered assembled (less casters), ready for use.
Also includes EVEN MORE equipment you need for a complete metal shaping station:
Foot operated Lancaster Shrinker with interchangeable Lancaster Stretcher jaw;
Classic Bowl Forming Head;
Shot Bag 12" (unfilled);
2-¾" Plastic Bossing Mallet (# FBM02);
2-¾ Hickory Barrel Mallet (# MUM00);
Hard Wood Flat Slapper w/ leather face (# FFS001);
90 minute instructional DVD, Blocking & Smoothing, by Ron Fournier (# BSD00)
Review Set Up Instructions
WHEN ORDERING, PLEASE NOTE:
This equipment ships via motor freight only. The shipping charge for this item is ESTIMATED to be $300. (for destinations within the continental United States) Actual shipping is based on a variety of factors and will be calculated once your order is placed. Factory charges $50 crate fee, which is noted on the details of your shipping estimate.
You will be contacted with actual shipping prior to shipment and billed for shipping, separately.
QuickShaper Mark II # FQSM2
SHIPS TRUCK FREIGHT, 665 lbs., class 85
Price does not include sales tax, if applicable. (MI residents, 6%)
QuickShaper Mark II # FQSM2
|
5500.00 |
|
|
We're pleased to announce our 2016 Workshop schedule, below. Save by enrolling in multiple classes! 5% off any 2 workshops, 10% off any 3
workshops. Enrollment must be received at the same time, for the same person.
Metal Fabrication Workshop
March 21–23, 2016, Mon - Wed
May 23–25, 2016, Mon - Wed
July 24–26, 2016, Sun – Tues {coordinates with July Advanced Workshop}
Aug 15–17, 2016, Mon - Wed
Sept 19–21, 2016, Mon - Wed
Nov 6–8, 2016, Sun – Tues {coordinates with Nov Advanced Workshop}
Enroll
Welding Workshop
March 24, 2016, Thurs
July 27, 2016, Wed
Sept 22, 2016, Thurs
Nov 9, 2016, Wed
Enroll
Advanced Metal Fabrication Workshop
July 28–30, 2016, Th - Sat
Nov 10–12, 2016, T - Sat
Enroll
FOURNIER ENTERPRRISES | 800-501-3722 or 586-323-9160
|
|
| |
|