|
|
Ideal for metal finishing the area around a weld seam on fabricated body work. Designed for use in hard to reach areas such as around braces, gussets and other blind areas.
|
|
|
Metal Finishing
Weld finishing and final planishing are achieved with some of the metal working "tools of the trade"
|
|
|
BLUNT TIP (ACCESSORY) FOR BULLSEYE PICKS
Optional blunt tip for use with standard bullseye picks. (Note: Our picks DO include the blunt tip.) This is a replacement part, add on for those who own a pick with the "sharp" tip.
1 year manufacturer's warranty
Made in USA
|
25.00 |
|
|
Bulls-eye picks were originally designed for the collision / dent repair trade, and also work very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. This kit includes the 15 inch AND 25 inch throat models.
Bulls-eye picks are especially handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
1 year manufacturer's warranty
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
INCLUDES:
15 inch reach bulls-eye pick
25 inch reach bulls-eye pick
Includes Standard and blunt tips
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for international customers correctly. Thank you for your understanding.
|
295.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 15 inch throat, it is handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
|
155.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 25 inch throat, it is handy for large panels or for a hard to reach dent. The open site gives the user a clear target for the tip to strike.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for non-US customers correctly. Thank you for your understanding.
|
165.00 |
|
|
Now in one easy step you can flare sheet metal panels for improved strength & appearance.
Flare Tools Part #: 1300-F-Series
Product Description Flare sheet metal panels for improved strength and appearance.
Flare tool guide ring centers tooling in your pre-cut hole then draw together with supply bolt.
Easily mounts in our Mittler Brothers Bench Presses.
SET OF 9 FLARE TOOLS INCLUDES:
1/2" Flare Tool, Part # 1300-001
5/8" Flare Tool, Part # 1300-002
3/4" Flare Tool, Part # 1300-003
1" Flare Tool, Part # 1300-004
1-1/4" Flare Tool, Part # 1300-005
1-1/2" Flare Tool, Part # 1300-006
1-3/4" Flare Tool, Part # 1300-007
2" Flare Tool, Part # 1300-008
2-1/2" Flare Tool, Part # 1300-009
A $425 VALUE! (Flares may also be purchased individually, please call to order)
MADE IN THE USA
|
370.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
OVAL PUNCH AND FLARE SET
These Mittler Brothers / Jamey Jordan Signature Series Oval Punch & Flare tools can create a unique oval shaped hole, with or without a flare in one easy step. Simply drill two pilot holes using the included template for the alignment pins, then place the tooling and material in a press. These oval punch and flare tools are precision machined from tool steel and heat-treated to a Rockwell hardness of 58 for years of use. They also feature a 16 gauge mild steel maximum capacity.
SPECIFICATIONS:
Finish Hole (inches): 1-¼ x 2, 1-¾ x 2-¾, 2 x 3-¼
Flare Height (inches): 1/4 (approximate)
Construction: heat treated steel
SET INCLUDES:
1-1/4 x 2 inch punch and flare tool
1-3/4 x 2-3/4 inch punch and flare tool
2 x 3-1/4 inch punch and flare tool
Universal press block
Material Thickness Capacity:
Aluminum (.060”)
Mild Steel (.060”)
Stainless Steel (.040”)
MADE IN USA, PART #1320-100
|
1465.00 |
|
|
Now ON SALE: Save 20%
4 Piece Metalworking Set is a must have for anyone working on metal projects that require drilling, chiseling, punching and mounting hardware! All tools are Professional Mechanics Grade Quality and can deliver 3,500 PSI on the intended target.
SET INCLUDES
High Speed Steel Center Punch
Combo Prick Punch/Center Punch
Self-Centering Center Punch
5/16" Cold Steel Chisel
all in a Hard Storage Case.
|
38.00 |
|
| |
|