|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 3" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
160.00 |
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
Allows the user to clearly view the molten pool while welding. Perfect for gas welding and brazing, the Sebring lens eliminates the orange glare associated with the use of flux and improves visibility ~ which improves the final weld!
Adjustable temples for proper fit. Lens is a shade 6 anti-scratch polycarbonate.
Good choice for those who do NOT wear prescription eyewear.
|
35.00 |
|
|
Allows the user to clearly view the molten pool while welding. Perfect for gas welding and brazing, the SEBRING lens eliminates the orange glare associated with the use of flux and improves visibility ~ which improves the final weld!
|
29.99 |
|
|
Excellent clarity & protection now in convenient Goggle style!
Allows the user to clearly view the molten pool while welding. Perfect for gas welding and brazing, the SEBRING lens eliminates the orange glare associated with the use of flux and improves visibility ~ which improves the final weld!
Lift front plate style welding goggle.
Good choice for fitting over prescription eyewear!
FEATURES
Clear plastic lens for viewing protection when lift front is in the lifted hinged position;
Soft PVC goggle body with a snug seal;
Indirect vents on top and bottom protecting against liquids and dust while permitting indirect ventilation;
Uses standard size filter, cover, impact and magnifier plates.
|
39.99 |
|
|
AMCO 22 brand aluminum welding flux, 8-oz. container. Used for welding aluminum & alloys.
This flux will produce a strong, non-porous weld by keeping the base metal and rod free of oxides during welding. Considered the benchmark industry flux for the welding of aluminum. Conforms to AMS 3414A.
How To Use:
Mix with water to form a paste and apply to both rod and base metal. After welding, remove residue with warm water. Recommended for use with #1100 bare aluminum.
Need a larger container? Also available in 16 oz.
|
25.00 |
|
|
AMCO 22 brand aluminum welding flux, large, 16-oz. container. Used for welding aluminum & alloys.
This flux will produce a strong, non-porous weld by keeping the base metal and rod free of oxides during welding. Considered the benchmark industry flux for the welding of aluminum. Conforms to AMS 3414A.
How To Use:
Mix with water to form a paste and apply to both rod and base metal. After welding, remove residue with warm water. Recommended for use with #1100 bare aluminum.
|
45.00 |
|
|
DHC 2000 Welding & Cutting Torch
This professional torch kit comes with everything needed for welding, brazing and cutting almost any material.
KIT INCLUDES:
DHC2000 torch body
Five welding tips (#0, #.5, #1, #2 and #3)
Tip Cleaner
Wrench
Check valves
Over cutter attachment (The overcutter curves over the welding tip to provide a PULL cut. It is used when cutting mild steel from 1/8″ – 1″. Also includes a guide wheel assembly for a steady hand while making long straight or pattern cuts. The rails can be staggered to perform angle or bevel cuts. They fit both the undercutter and the overcutter.
Under cutter attachment (Undercutter attaches under the welding tip for cutting thin sheet metal. This is generally referred to as a PUSH cut. It is used for cutting 28-16 gage 1/64″ – 1/16″ material.)
Instructional manual
Ron Fournier's "How to Gas Weld Aluminum" DVD!
Manufactured with pride in the USA by Detroit Torch.
Please Note:
Torch kit and accessories are not available for shipment to the following countries: Australia, Sweden, New Zealand. Thank you for your understanding.
Torch kit has AMERICAN threads.
|
450.00 |
|
| |
|