|
|
Due to COVID restrictions please call ud for availability. Apologies for the inconvenience.
Course prerequisite: we require that the student attend Metal Fabrication Workshop 1 prior to attending the Advanced Workshop. It is also essential that the student has practiced the skills taught in the first workshop in order to gain maximum benefit from the course.
WORKSHOP TUITION IS $1,200 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $400 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
400.00 |
|
|
We offer Private Metal Shaping & Fabrication training by request. This is intended for those who may have a project, or part of a project that they would like to bring in to the shop for assistance. It is also ideal for those who want to further their skills in a very specific area, or who may just need some "refresher" shop time.
Private training is offered as schedule permits, and there is a three-hour minimum. Materials, as necessary, are charged in addition to the hourly rate. Tuition is $75 per hour for one student, $125 per hour for two students. No more than two students may attend at one session.
When you sign up / enroll, please submit 3 potential dates (with times, preferably) that will work for you. Please check these dates against our regular class schedules, because those are black out dates for private training. Many students, however, chose to enroll in a scheduled class and add a day, usually at the end of the class session for indivdual, private training.
If you have questions about private training, or want to check availability, please contact us here
If you prefer to mail you request: REGISTRATION FORM
|
225.00 |
|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
|
SET INCLUDES:
Metal Shaping Blocking & Smoothing Techniques;
Bucks, Patterns and Forms;
Gas-Welding Aluminum.
These classic metal work videos provide thorough instruction and demonstration on three of the cornerstones of quality metal work: English wheel techniques, Gas-Welding skills and Buck Building.
If you are planning a custom metal work project, these tapes provide valuable help and inspiration!
#FEV03D, DVD SET by Ron Fournier
|
76.00 |
|
|
7 title Fournier METAL SHAPING DVD SET
SET INCLUDES:
Metal Shaping: Blocking & Smoothing, 90 min.
How To Gas-Weld Aluminum, 60 min.
Bucks, Patterns & Forms, 60 min.
Hand Tools, 90 min.
Large Equipment, 90 min.
Hammerforming Techniques, 76 min. with Ron Covell and Ron Fournier
Motorcycle Metal Fabrication (2-dvd set), 105 min.
Special price $199!
That's 25% savings on more than 9 hours of high-quality Metal Work Instruction & Demonstration!
|
199.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 15 inch throat, it is handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
|
155.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 25 inch throat, it is handy for large panels or for a hard to reach dent. The open site gives the user a clear target for the tip to strike.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for non-US customers correctly. Thank you for your understanding.
|
165.00 |
|
|
Bulls-eye picks were originally designed for the collision / dent repair trade, and also work very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. This kit includes the 15 inch AND 25 inch throat models.
Bulls-eye picks are especially handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
1 year manufacturer's warranty
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
INCLUDES:
15 inch reach bulls-eye pick
25 inch reach bulls-eye pick
Includes Standard and blunt tips
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for international customers correctly. Thank you for your understanding.
|
295.00 |
|
|
A selection of 6 back issues from our remaining stock of Metal Crafter's News.
Metal Crafter's News®, The Journal of Metal Fabrication Published by Ron Fournier
This was a bimonthly magazine created specifically for metal craftsman and automotive enthusiasts in the mid to late 90's. Metal Crafter's News focused on custom metal shaping for the automotive, aircraft and motorcycle industries.
Ron used MCN to share more than 35 years of experience & insight on a variety of topics, including: tips & techniques, craftsman profiles, projects & patterns, new construction, restoration, tool & product reviews and more.
Please note: these have been out of print for quite a few years. We have a remaining surplus of some issues and offer them for those still interested. Please call if you have any questions reagrding availability of a specific issue.
|
20.00 |
|
|
This unique design from MetalAce is a great mid-sized wheel. It is well suited for heavy forming, and yet sized to fit perfectly in small shops. The 3-leg design includes rubber feet for a steady grip on all floors, while the retractable handle and tip-back casters allow easy mobility. A great on-the-go metal forming machine; perfect for racing needs, coachbuilding, hot-rod building, vintage aircraft restoration, and sculpture work. The sturdy jack mechanism offers a quick-release anvil yoke and precision alignment adjusters. The easy to use alignment adjusters make quick work of truing the anvil to the top wheel, as well as offsetting the lower anvil for reverse curve and edging operations.
The MetalAce 30F Classic Series English Wheel is made in the USA with pride, using heavy wall tubular construction. The machine is powder-coated for a professional, durable finish.
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
(1) 8 x 3 inch upper wheel
Warranty: 1 year manufacturer's warranty
#MA30F, MADE IN USA
WHEN ORDERING, PLEASE NOTE:
This equipment ships via truck freight. The shipping charge for this item will be ESTIMATED during checkout. Actual shipping is based on a variety of factors and will be verified once your order is placed. You will be contacted with actual shipping prior to shipment and billed separately, if necessary.
SHIPS TRUCK FREIGHT, 373 lbs., class 85
Price does not include sales tax, if applicable (MI residents, 6%).
|
3400.00 |
|
| |
|