|
|
Unwelded Standard Bench Mount English Wheel Kit
Kit Includes all machined parts, cut to length frame material, detailed step by step instructions and blueprints. A great value, especially if you have fabrication skills!
The photo above is Mittler Benchtop wheel that we built for the shop with a custom made stand. We needed an additional wheel that was high quality and didn't take up too much space. If you're looking for the same type of wheel look no further!
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1450.00 |
|
|
3" dia. Bossing Mallet, Designed by Ron Fournier.
Use with a shot / sand bag to shape metal ~ the handle won't strike the edge of your work piece!
Mallets are made of non-marring plastic for long life, with sturdy hickory handles.
Deep reach makes forming deep bowl shapes quick & easy.
Weight: 26 oz, Small Radius: 1", Large Radius: 3", Overall head length 7 "
At 26 ounces, this mallet moves metal fast! The heaviest of all our bossing-style mallets, this is a great choice when working with steel.
After years of frustration with the mallets commonly available, (and usually made for other trades) Ron decided to have custom metal shaping Bossing Mallets made to his design and specifications.
These mallets have unique radii and an extra deep "reach" measured between the face of the mallet and the handle. This deep reach makes forming bowl shapes quick and easy.
MADE IN USA
|
63.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
BENCH MOUNT ENGLISH WHEEL
We are often asked for an affordable bench top wheel, and are pleased to offer this model. It's an affordable version for the home hobbyist or race enthusiast. Perfect for the custom shop in need of an extra shaping station that won't eat up a ton of space. This pre-welded unit arrives painted and completely finished as shown.
26-1/2" overall throat depth
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1680.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
24" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard: Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12".
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
1100.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
12" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard:
Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12"
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
950.00 |
|
|
BOSSING MALLET SET INCLUDES:
Each Bossing Mallet has two radii for added usefulness:
FBM01: Small radius dia: ½", Large radius dia. 2-¼" (shown right)
An elegantly shaped, custom-made tool. Versatile and effective for aluminum and mild steel projects.
FBM02: Small radius dia: ¾", Large radius dia. 1-3/8" (shown middle)
A best seller! Nicely balanced and easy to handle.
FBM03: Small radius dia. 1", Large radius dia. 3" (shown left)
At 26 ounces, this mallet moves metal fast! The heaviest of all our bossing-style mallets, this is a great choice when working with steel.
Pair with the shot bag of your choice for truly professional results!
#FBMSET, MADE IN USA
|
136.00 |
|
|
2" dia. Bossing Mallet, Designed by Ron Fournier.
Use with a shot / sand bag to shape metal ~ the handle won't strike the edge of your work piece!
Deep reach makes forming deep bowl shapes quick and easy.
Mallets are made of non-marring plastic for long life, with sturdy hickory handles.
Weight: 11.7 oz, Small Radius: 1/2", Large Radius: 2-1/4", Overall head length 7"
This Bossing Mallet is ideal for use with aluminum or steel, and is considered a "medium duty" mallet.
After years of frustration with the mallets commonly available, (often made for other trades) Ron decided to have custom metal shaping Bossing Mallets made to his design and specifications.
These mallets have unique radii and an extra deep "reach" measured between the face of the mallet and the handle. This deep reach makes forming bowl shapes quick and easy.
MADE IN USA
|
55.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 15 inch throat, it is handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
|
155.00 |
|
|
A Metalshaping Essential!
Hard Wood Slappers for Metal Shaping Projects in Aluminum, Copper, Brass & Steel
Metalshapers know that wood slappers of various shapes, although seemingly simple tools, quickly become a valuable asset in any metal shop. Made from top-quality hard wood, our signature slappers are made to our specs from grade A hard maple for strength and durability.
Why do I need a wood slapper when I have so many great hammers?
Unlike a hammer or a mallet, a wood slapper has the added benefit of a offering a variety of curved surfaces for forming the desired curve in the metal being worked. Wood slappers are particularly helpful for stretching large areas of metal and for shaping gradual curves. And, almost without exception, wood slappers are required for large metal shaping projects such as hoods, door skins, trunk lids and the like.
Features Include:
Rounded handle and grip area are designed with comfort in mind to provide the hand and wrist a relaxed working position combined with a sturdy grasp.
A long-term tool investment! Our wood slappers are custom designed for professional results. Additionally, they are sealed with protective oil to resist stains and guard against moisture.
Part of our signature series. Made in the USA.
|
58.00 |
|
| |
|