|
|
Due to COVID restrictions please call ud for availability. Apologies for the inconvenience.
Course prerequisite: we require that the student attend Metal Fabrication Workshop 1 prior to attending the Advanced Workshop. It is also essential that the student has practiced the skills taught in the first workshop in order to gain maximum benefit from the course.
WORKSHOP TUITION IS $1,200 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $400 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
400.00 |
|
|
SET INCLUDES:
Metal Shaping Blocking & Smoothing Techniques;
Bucks, Patterns and Forms;
Gas-Welding Aluminum.
These classic metal work videos provide thorough instruction and demonstration on three of the cornerstones of quality metal work: English wheel techniques, Gas-Welding skills and Buck Building.
If you are planning a custom metal work project, these tapes provide valuable help and inspiration!
#FEV03D, DVD SET by Ron Fournier
|
76.00 |
|
|
Ron explains the technique of blocking and smoothing aluminum parts using shot bags, mallets, heads and slappers. Final smoothing is demonstrated on the English wheel.
A variety of shapes are made, including: bowl, tear drop, and motorcycle fender. Also, forming a section of a patch panel for a sports car fender using a buck.
Thorough explanation of the tools and equipment used to form .050" and .063" aluminum projects.
|
35.00 |
|
|
A selection of 6 back issues from our remaining stock of Metal Crafter's News.
Metal Crafter's News®, The Journal of Metal Fabrication Published by Ron Fournier
This was a bimonthly magazine created specifically for metal craftsman and automotive enthusiasts in the mid to late 90's. Metal Crafter's News focused on custom metal shaping for the automotive, aircraft and motorcycle industries.
Ron used MCN to share more than 35 years of experience & insight on a variety of topics, including: tips & techniques, craftsman profiles, projects & patterns, new construction, restoration, tool & product reviews and more.
Please note: these have been out of print for quite a few years. We have a remaining surplus of some issues and offer them for those still interested. Please call if you have any questions reagrding availability of a specific issue.
|
20.00 |
|
|
A necessity for Metal Workers! Ron's popular follow-up reference book to Metal Fabricator's Handbook.
INSIDE YOU WILL FIND TIPS ON: Setting up your own shop, proper use of the English wheel, basic metal shaping techniques, the art of hammerforming, proper riveting techniques, and tips on restoring original sheet metal.
Fully illustrated how-to sequences are included, along with many photos to develop sheet metal skills.
|
28.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
John Glover has done a tremendous job of describing and illustrating techniques refined and perfected over a lifetime of unparalleled metal shaping successes in The Practical Sheet Metal Worker.
The book is divided into sections that include working the edges of metal parts, like beading, forming a wire edge and turning a flange. There is also a wealth of information on shrinking, tucking and heat shrinking. A section on making louvers is particularly helpful. The 'finishing touches' described in the book can enhance any metal shaping project, from basic to very advanced. Happily, John covers metal fabrication details and fine points in true English form - with excellent clarity and exquisite attention to detail.
Antique race cars, motorcycle gas tanks, aircraft parts and many other projects are all covered. Readers will enjoy John's perspective and personal touch along with intriguing information from days gone by. It’s full of valuable information about the hand forming of metal parts used in restoration, prototype, race and custom cars.
|
26.75 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
Metal work tools hand-picked for every day usefulness in custom metal fabrication shops!
|
|
|
Metal Shaping SALES, SETS & SPECIALS
Find discounts and special pricing on some of the hottest Metal shaping and fabrication tools around.
|
|
| |
|