|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
|
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed.
These can also be used as regular hole punches by not using the flare forming ring.
Anti-friction bearings are included with purchase.
AUTOMOTIVE PUNCH & BEAD TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
MADE IN THE USA
|
720.00 |
|
|
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed. These can also be used as regular hole punches by not using the flare forming ring. Anti-friction bearings are included with purchase.
PUNCH & BEAD TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4""
2"
2-1/2"
3"
MADE IN THE USA
|
860.00 |
|
|
Now ON SALE: Save 20%
4 Piece Metalworking Set is a must have for anyone working on metal projects that require drilling, chiseling, punching and mounting hardware! All tools are Professional Mechanics Grade Quality and can deliver 3,500 PSI on the intended target.
SET INCLUDES
High Speed Steel Center Punch
Combo Prick Punch/Center Punch
Self-Centering Center Punch
5/16" Cold Steel Chisel
all in a Hard Storage Case.
|
38.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼") in metal thickness of .040” to .065” aluminum and mild steel.
The total clearance after the punch/flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1-1/2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
ONE SIZE: 1-1/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1-3/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
| |
|