|
|
One hour instructional DVD covering the DHC 2000 Torch and Regulator set up. Demonstrations of welding and cutting of ferrous and non ferrous materials throughout the video provide a full understanding of the DHC 2000 welding and cutting system.
|
29.00 |
|
|
This program covers many advanced topics in TIG welding, including welding chrome moly steel, stainless steel, aluminum, magnesium, bronze, copper, and titanium. You’ll also learn how to weld castings made from aluminum, magnesium, and bronze. Clear guidelines are given for using the pulse and waveform adjustments that many new welders have, along with great practical advice on machine setup, joint preparation, and weld finishing.
Ron’s clear and detailed instructions are easy to follow, and the striking close-up photography shows you exactly what to look for as you weld!
111 min., #1000-25
|
40.00 |
|
|
MIG Welding is widely used, but few people really understand how each of the variables affects the finished weld. This program can be easily understood by a beginner, but it covers information even seasoned professionals can learn from. Ron Covell goes through the entire process step-by-step, and gives clear descriptions of how each factor affects the weld, including wire speed, voltage, stickout, gun angle, travel speed, and gas flow. He also covers plug welds, patch panels, welding aluminum, and using flux core wire.
You’ll especially enjoy the special bonus section on Plasma Cutting!
70 minute DVD, # 1000-22
|
40.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
SET INCLUDES:
Metal Shaping Blocking & Smoothing Techniques;
Bucks, Patterns and Forms;
Gas-Welding Aluminum.
These classic metal work videos provide thorough instruction and demonstration on three of the cornerstones of quality metal work: English wheel techniques, Gas-Welding skills and Buck Building.
If you are planning a custom metal work project, these tapes provide valuable help and inspiration!
#FEV03D, DVD SET by Ron Fournier
|
76.00 |
|
|
LOST ART The English Wheel, by Sam Smith
We're thrilled to be featured in the latest installment of Sam Smith's "Lost Art" series! On May 14th, Jeff Fournier spent the day with Sam at our shop for an intensive tour and metal shaping instruction. The experience is featured in the August issue of @RoadandTrack magazine. "Americans call it an English wheel, but the English call it a wheeling machine. It's technically..." read more
Sincere thanks to @ThatSamSmith & crew for spotlighting our craft!
FOURNIER ENTERPRRISES | 800-501-3722 or 586-323-9160
|
|
|
|
|
|
|
|
|
Available on demand, devoted to YOUR interests or project:
Metal Shaping
Fabrication
Welding Skills
|
|
| |
|