|
|
Deep Throat Shrinker & Stretcher
A professional quality foot-activated shrinker and stretcher unit. With a 6" throat depth, it makes forming compound panels quick and easy. Shrinker and Stretcher jaws swap out in seconds with the included allen wrench. Works great on sheet metal and aluminum alike. Well designed, this is an high quality tool for the discerning metal worker. Includes a 1 year warranty, even on the shrinker and stretcher jaws!
KSM 155 Shrinker/Stretcher Features
Mild steel capacity 16 gauge
6" deep throat
Quick change jaws included, choose "standard" OR "aluminum" Shrinking and Stretching Jaws. Standard jaws are designed for use on all materials. Aluminum jaws are designed to leave lighter marks than the standard jaws on aluminum
Foot operation to leave hands free to work the material
One year warranty
Wheeled base included to use as freestanding unit
KSM 155 Specifications
Working depth (throat): 6"
Height: 44"
Width: 6.3 "
Overall depth: 30.3"
Weight: 70 lbs.
Note: Ships via motor freight. Shipping charges for this item will NOT be reflected in the shopping cart. You will be contacted with a shipping quote prior to shipment. (Ship weight 110 lbs.)
Made in Sweden
|
3150.00 |
|
|
HEM ROLL SET, for Mittler Power Drive Bead Rollers
SET INCLUDES:
STEP #1 Metal is formed 90°
STEP #2 Metal is formed 140°
STEP #3 Metal is rolled flat
Add strength and safety to every job with Hem Rolls, a productive additions to your Mittler Brothers Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
185.00 |
|
|
HEM ROLL, for Mittler Power Drive Bead Rollers
STEP #1 Forms the metal 90 degrees
Add strength and safety to every job with Hem Rolls, a productive addition to your Mittler Brother Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep on steel or aluminum up to .040" without marring pre-painted aluminum. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
100.00 |
|
|
HEM ROLL , for Mittler Power Drive Bead Rollers
STEP #2 Forms the metal to 140 degrees
Add strength and safety to every job with Hem Rolls, a productive addition to your Mittler Brother Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep on steel or aluminum up to .040" without marring pre-painted aluminum. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
100.00 |
|
|
What do you do if you have a car with a fender that is damaged beyond repair, or missing? Ron shows how to use the opposite fender to design a buck, pointing out the features required to make a new fender that perfectly mirrors the model. You will see him analyze a '36 Ford fender, determine the number of pieces to make it from, and exactly where to place the seams to accommodate the intricate details, including the running board bulge and the rolled edge of the wheel opening.
A fascinating, in-depth look at the start-to-finish construction of a challenging project!
119 min., #1000-24
|
40.00 |
|
|
DHC 2000 Welding & Cutting Torch
This professional torch kit comes with everything needed for welding, brazing and cutting almost any material.
KIT INCLUDES:
DHC2000 torch body
Five welding tips (#0, #.5, #1, #2 and #3)
Tip Cleaner
Wrench
Check valves
Over cutter attachment (The overcutter curves over the welding tip to provide a PULL cut. It is used when cutting mild steel from 1/8″ – 1″. Also includes a guide wheel assembly for a steady hand while making long straight or pattern cuts. The rails can be staggered to perform angle or bevel cuts. They fit both the undercutter and the overcutter.
Under cutter attachment (Undercutter attaches under the welding tip for cutting thin sheet metal. This is generally referred to as a PUSH cut. It is used for cutting 28-16 gage 1/64″ – 1/16″ material.)
Instructional manual
Ron Fournier's "How to Gas Weld Aluminum" DVD!
Manufactured with pride in the USA by Detroit Torch.
Please Note:
Torch kit and accessories are not available for shipment to the following countries: Australia, Sweden, New Zealand. Thank you for your understanding.
Torch kit has AMERICAN threads.
|
450.00 |
|
|
EDGE BEAD ROLLS, for Mittler Power Drive Bead Rollers
Built in edge guide makes a tough job easier. Designed to roll a strengthening bend around the edge of a panel. Works great for wheel wells too!
We offer a variety of Edge Bead Rolls. Simply choose one at a time from the drop down box below and add to cart. Add as many as you like.
Bead rolls are 2-3/4" ID x 3/4" ID x 1" wide (bead centered on roll width).
MADE IN THE USA
|
70.00 |
|
|
HEM ROLL , for Mittler Power Drive Bead Rollers
STEP #3 Metal is rolled flat.
Add strength and safety to every job with Hem Rolls, a productive addition to your Mittler Brother Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep on steel or aluminum up to .040" without marring pre-painted aluminum. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
55.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
24" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard: Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12".
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
1100.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
12" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard:
Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12"
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
950.00 |
|
| |
|