|
|
TIP #2.5 for DHC2000 Torch.
We recommend having as many tip sizes as possible for your DHC2000 torch, and we're glad ½ size tips are now available.
When working with low line pressure, it is very important to match the tip size to the metal being welded. The 2.5 tip is best for use with thick aluminum.
Identified by straight on barrel. This tip is useful for heavy steel cast aluminum welding over 1/4″
Manufactured with pride in the USA by Cobra Torches
|
25.00 |
|
|
2" dia. Bossing Mallet, Designed by Ron Fournier.
Use with a shot / sand bag to shape metal ~ the handle won't strike the edge of your work piece!
Deep reach makes forming deep bowl shapes quick and easy.
Mallets are made of non-marring plastic for long life, with sturdy hickory handles.
Weight: 11.7 oz, Small Radius: 1/2", Large Radius: 2-1/4", Overall head length 7"
This Bossing Mallet is ideal for use with aluminum or steel, and is considered a "medium duty" mallet.
After years of frustration with the mallets commonly available, (often made for other trades) Ron decided to have custom metal shaping Bossing Mallets made to his design and specifications.
These mallets have unique radii and an extra deep "reach" measured between the face of the mallet and the handle. This deep reach makes forming bowl shapes quick and easy.
MADE IN USA
|
55.00 |
|
|
FOURNIER DEEP STRETCHING MALLET
2-1/4" diameter x 10" long
This sturdy mallet features small diameter head for quick and efficient stretching. Long reach allows you to shape parts without the handle hitting the work piece. The deep stretching mallet is ideal for small steel or heavier gage aluminum parts.
Extra-long for deep stretching
One end flat with radiused edges
Other end has a 2" radius
Weight 1.75 lbs.
MADE IN USA
|
48.00 |
|
|
LOUVER PRESS KIT
KIT INCLUDES:
10-ton hydraulic ram
Precision slide assembly
One set of louver dies included with purchase ( your choice of one 1" - 5", 3" dome or 4" dome )
Blueprints & complete instructions for you to build a 48" throat depth press.
FEATURES:
Punches Steel, Aluminum or Stainless
Punches up to 2" dia. hole
Up to 5" long louvers, depending on your choice of punch at time of purchase.
Optional louver die sets available
Please note: requires either Air Hydraulic Pump w/ 20' Hose or an electric hydraulic pump, each sold separately.
MADE IN USA
|
1815.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
HEM ROLL SET, for Mittler Power Drive Bead Rollers
SET INCLUDES:
STEP #1 Metal is formed 90°
STEP #2 Metal is formed 140°
STEP #3 Metal is rolled flat
Add strength and safety to every job with Hem Rolls, a productive additions to your Mittler Brothers Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
185.00 |
|
|
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed. These can also be used as regular hole punches by not using the flare forming ring. Anti-friction bearings are included with purchase.
PUNCH & BEAD TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4""
2"
2-1/2"
3"
MADE IN THE USA
|
860.00 |
|
|
2-3/4" dia. Bossing Mallet, Designed by Ron Fournier
Use with a shot / sand bag to shape metal ~ the handle won't strike the edge of your work!
Mallets are made of non-marring plastic for long life, with sturdy hickory handles.
Deep reach makes forming deep bowl shapes quick & easy.
Weight: 23 oz., Small Radius dia: 3/4", Large Radius dia: 1-3/8", Overall head length 8"
Medium duty mallet for aluminum or mild steel.
After years of frustration with the mallets commonly available, (and usually made for other trades) Ron decided to have custom metal shaping Bossing Mallets made to his design and specifications.
These mallets have unique radii and an extra deep "reach" measured between the face of the mallet and the handle. This deep reach makes forming bowl shapes quick and easy. Nicely balanced and easy to handle. Part of our signature series.
MADE IN USA
|
58.00 |
|
|
FOURNIER DETAILING MALLET
2-1/4" dia x 4" long
Introducing our "go to" mallet for the simple blocking process. It features a great, multi-purpose radius, and an ideal size and weight. It is our preferred tool for hammerforming small to medium pieces. The detailing mallet is perfect for turning panel edges, fine tuning bends formed in the brake as well as general part detailing. It also comes in handy for spot shrinking.
Small size for final finish and detail work
One end flat with radiused edges
Other end has a 2.5" radius
Weight 12 oz.
MADE IN USA
|
26.00 |
|
|
FOURNIER HEAVY STRETCHING MALLET
3" diameter on one end, 4" diameter on the other end, 8" long
This mallet combines a large surface area with hefty weight to effectively shape large parts, leaving minimal hammer marks. The generous, deep reach and radiused edges move metal quickly with beautiful results. Our heavy stretching mallet is great for aggressive shaping, especially when working with steel.
For heavy stretching of larger parts
3" end has a 2.5" radius
4 end has a 6.5" radius
Weight 2.5 lbs.
MADE IN USA
|
75.00 |
|
| |
|