|
|
John Glover has done a tremendous job of describing and illustrating techniques refined and perfected over a lifetime of unparalleled metal shaping successes in The Practical Sheet Metal Worker.
The book is divided into sections that include working the edges of metal parts, like beading, forming a wire edge and turning a flange. There is also a wealth of information on shrinking, tucking and heat shrinking. A section on making louvers is particularly helpful. The 'finishing touches' described in the book can enhance any metal shaping project, from basic to very advanced. Happily, John covers metal fabrication details and fine points in true English form - with excellent clarity and exquisite attention to detail.
Antique race cars, motorcycle gas tanks, aircraft parts and many other projects are all covered. Readers will enjoy John's perspective and personal touch along with intriguing information from days gone by. It’s full of valuable information about the hand forming of metal parts used in restoration, prototype, race and custom cars.
|
26.75 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
BEAD ROLLER Learning Package
You save 20% on three of our most popular Bead Roller DVDs:
The Art of Bead Rolling, Vol. 1, DVD by Jamey Jordan;
Beading Machine Basics DVD by Ron Covell;
The Art of Bead Rolling, Vol. 2, DVD by Jamey Jordan;
|
76.00 |
|
|
Ron Covell demonstrates dozens of ways to work with tubing, including bending with heat, bending with tube bending machines (both inexpensive and high-end machines), mitering, flaring and tapering tubing.
An extensive section deals with using U-bends, showing how to create anything from simple water pipes to elaborate headers.
One of Ron's most popular videos ~ great information communicated concisely with lots of close up shots!
DVD, 95 min., #WTV01 (1000-4)
|
40.00 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Ron shows and explains a variety of bucks. Step-by-step demonstration on building a sectional fender buck. Additional topics include: material & fastening recommendations, determining the frequency of stations, construction differences between single use and low-production bucks.
60 min. DVD, BPD00
|
30.00 |
|
|
Planishing hammers are a real 'workhorse' of the metal shaping process. They are unexcelled for flattening welds, working in constricted areas, and stretching flanges. Ron demonstrates the basic procedures for using these machines, including proper die selection and operator technique, and he shows their use on both steel and aluminum panels.
More specialized techniques are covered too, including flanging, riveting, and making reverse curves. This program shows seven different planishing hammers in action, from bargain-priced entry-level machines, through vintage and hand-held machines, to the most robust professional-level machines available, giving the viewer invaluable insight about the great diversity of these machines, and which features are most important for specific types of work.
As popular as planishing hammers are, there is precious little information available on their proper use, and this program will give you a strong foundation for selecting and using the right machine and tooling for your application.
54 min., #1000-29
|
40.00 |
|
|
MIG Welding is widely used, but few people really understand how each of the variables affects the finished weld. This program can be easily understood by a beginner, but it covers information even seasoned professionals can learn from. Ron Covell goes through the entire process step-by-step, and gives clear descriptions of how each factor affects the weld, including wire speed, voltage, stickout, gun angle, travel speed, and gas flow. He also covers plug welds, patch panels, welding aluminum, and using flux core wire.
You’ll especially enjoy the special bonus section on Plasma Cutting!
70 minute DVD, # 1000-22
|
40.00 |
|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
DHC 2000 Welding & Cutting Torch
This professional torch kit comes with everything needed for welding, brazing and cutting almost any material.
KIT INCLUDES:
DHC2000 torch body
Five welding tips (#0, #.5, #1, #2 and #3)
Tip Cleaner
Wrench
Check valves
Over cutter attachment (The overcutter curves over the welding tip to provide a PULL cut. It is used when cutting mild steel from 1/8″ – 1″. Also includes a guide wheel assembly for a steady hand while making long straight or pattern cuts. The rails can be staggered to perform angle or bevel cuts. They fit both the undercutter and the overcutter.
Under cutter attachment (Undercutter attaches under the welding tip for cutting thin sheet metal. This is generally referred to as a PUSH cut. It is used for cutting 28-16 gage 1/64″ – 1/16″ material.)
Instructional manual
Ron Fournier's "How to Gas Weld Aluminum" DVD!
Manufactured with pride in the USA by Detroit Torch.
Please Note:
Torch kit and accessories are not available for shipment to the following countries: Australia, Sweden, New Zealand. Thank you for your understanding.
Torch kit has AMERICAN threads.
|
450.00 |
|
| |
|