|
|
High quality and EXTENDED THROAT make this 42" Power Drive Bead Roller a VERSATILE performer!
FEATURES INCLUDE:
Heavy Duty All Fabricated Plate Steel Construction
Powder coated for good looks and durability
Heat treated gears for long life
Oillite bushings at all rotation points for long life
Forward and Reverse switch for left or right side operation
Adjustable depth of bead
Variable speed foot control for hands free operation
MADE IN THE USA
PLEASE NOTE: This product ships via motor freight only. Shipping charges for this item will NOT be reflected in the shopping cart. You will be contacted with a shipping quote prior to shipment.
|
1800.00 |
|
|
Bolts into existing holes on 24" Bead Rollers (210-24, 210-24NV, 210-24M, 202-24, 202-24NV)
Supports Material While You Work
Folds Up & Out Of The Way When Needed
Includes Drill Hole Pattern & Instructions to Drill Support Holes for 36" Bead Rollers (200-36, 200-36NV, 202-36, 202-36NV)
38” L x 20” W
Bead roller and stand NOT included.
|
280.00 |
|
|
This MANUAL bead roller uses the same heavy-duty billet aluminum frame and components as found in the Mittler Brothers Power Drive Bead Roller.
Features Include:
Heavy duty billet aluminum frame construction;
Adjustable depth of bead;
Oillite bushings at all rotation points for long life;
Heat treated gears for years of trouble free operation;
1-1/8" throat height;
Hand crank for manual operation;
NOTE: This machine does not include bead rolls - they must be purchased separately.
This unit can be quickly & easily converted to a Power Bead Roller when production demand increases by bolting on the electric motor, controls, and foot pedal! When you are ready to upgrade, request P/N 200-302 for the Manual to Power BR Conversion Motor/Electrical Kit. Kit Price $350.00 as of 08/2014.
Ship weight 56 lbs.
Made in the USA
|
850.00 |
|
|
What do you do if you have a car with a fender that is damaged beyond repair, or missing? Ron shows how to use the opposite fender to design a buck, pointing out the features required to make a new fender that perfectly mirrors the model. You will see him analyze a '36 Ford fender, determine the number of pieces to make it from, and exactly where to place the seams to accommodate the intricate details, including the running board bulge and the rolled edge of the wheel opening.
A fascinating, in-depth look at the start-to-finish construction of a challenging project!
119 min., #1000-24
|
40.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
A huge variety of bead rolls for use with all standard (1-1/8" throat) Mittler Brothers Bead Rollers! These rolls will fit models #: 210-24, 210-24NV, 200-36, 200-36NV, 200-42 AND 210-24M.
Select options from menu, above. "Standard" shape rolls are $65. Other optional rolls vary, as indicated next to roll description.
All bead rolls are Made in USA
|
75.00 |
|
|
24" Industrial Variable Speed Bead Roller
24" Throat Depth
Billet aluminum frame
1-1/8" Throat Height
Variable speed foot pedal operated
Adjustable depth of bead
Forward / Reverse switch
100+ optional bead roll profiles
Oilite bushings for long life
Speed range adjustment knob
Made in USA
|
1800.00 |
|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
For Use with all Standard (1-1/8” Throat) Bead Rollers
Models # 210-24, 210-24NV, 200-36, 200-36NV, 200-42, 210-24M, 202-24, 202-24NV, 202-36 & 202-36NV
Mittler Bros. Bead Rolls Are CNC Machined From Heat Treated Steel For Long Life
Install With MB Stamp Toward Machine
MADE IN THE USA, #201-058
|
90.00 |
|
| |
|