|
|
3" dia. Bossing Mallet, Designed by Ron Fournier.
Use with a shot / sand bag to shape metal ~ the handle won't strike the edge of your work piece!
Mallets are made of non-marring plastic for long life, with sturdy hickory handles.
Deep reach makes forming deep bowl shapes quick & easy.
Weight: 26 oz, Small Radius: 1", Large Radius: 3", Overall head length 7 "
At 26 ounces, this mallet moves metal fast! The heaviest of all our bossing-style mallets, this is a great choice when working with steel.
After years of frustration with the mallets commonly available, (and usually made for other trades) Ron decided to have custom metal shaping Bossing Mallets made to his design and specifications.
These mallets have unique radii and an extra deep "reach" measured between the face of the mallet and the handle. This deep reach makes forming bowl shapes quick and easy.
MADE IN USA
|
63.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
12" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard:
Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12"
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
950.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
24" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard: Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12".
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
1100.00 |
|
|
7 title Fournier METAL SHAPING DVD SET
SET INCLUDES:
Metal Shaping: Blocking & Smoothing, 90 min.
How To Gas-Weld Aluminum, 60 min.
Bucks, Patterns & Forms, 60 min.
Hand Tools, 90 min.
Large Equipment, 90 min.
Hammerforming Techniques, 76 min. with Ron Covell and Ron Fournier
Motorcycle Metal Fabrication (2-dvd set), 105 min.
Special price $199!
That's 25% savings on more than 9 hours of high-quality Metal Work Instruction & Demonstration!
|
199.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
Planishing hammers are a real 'workhorse' of the metal shaping process. They are unexcelled for flattening welds, working in constricted areas, and stretching flanges. Ron demonstrates the basic procedures for using these machines, including proper die selection and operator technique, and he shows their use on both steel and aluminum panels.
More specialized techniques are covered too, including flanging, riveting, and making reverse curves. This program shows seven different planishing hammers in action, from bargain-priced entry-level machines, through vintage and hand-held machines, to the most robust professional-level machines available, giving the viewer invaluable insight about the great diversity of these machines, and which features are most important for specific types of work.
As popular as planishing hammers are, there is precious little information available on their proper use, and this program will give you a strong foundation for selecting and using the right machine and tooling for your application.
54 min., #1000-29
|
40.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
| |
|