|
|
Metal Shaping Books & DVDs
Instructional books and films from top Metal Shaping industry experts!
|
|
|
OVAL PUNCH AND FLARE SET
These Mittler Brothers / Jamey Jordan Signature Series Oval Punch & Flare tools can create a unique oval shaped hole, with or without a flare in one easy step. Simply drill two pilot holes using the included template for the alignment pins, then place the tooling and material in a press. These oval punch and flare tools are precision machined from tool steel and heat-treated to a Rockwell hardness of 58 for years of use. They also feature a 16 gauge mild steel maximum capacity.
SPECIFICATIONS:
Finish Hole (inches): 1-¼ x 2, 1-¾ x 2-¾, 2 x 3-¼
Flare Height (inches): 1/4 (approximate)
Construction: heat treated steel
SET INCLUDES:
1-1/4 x 2 inch punch and flare tool
1-3/4 x 2-3/4 inch punch and flare tool
2 x 3-1/4 inch punch and flare tool
Universal press block
Material Thickness Capacity:
Aluminum (.060”)
Mild Steel (.060”)
Stainless Steel (.040”)
MADE IN USA, PART #1320-100
|
1465.00 |
|
|
|
|
|
|
|
|
SET INCLUDES:
Metal Shaping Blocking & Smoothing Techniques;
Bucks, Patterns and Forms;
Gas-Welding Aluminum.
These classic metal work videos provide thorough instruction and demonstration on three of the cornerstones of quality metal work: English wheel techniques, Gas-Welding skills and Buck Building.
If you are planning a custom metal work project, these tapes provide valuable help and inspiration!
#FEV03D, DVD SET by Ron Fournier
|
76.00 |
|
|
One hour instructional DVD covering the DHC 2000 Torch and Regulator set up. Demonstrations of welding and cutting of ferrous and non ferrous materials throughout the video provide a full understanding of the DHC 2000 welding and cutting system.
|
29.00 |
|
|
FENDER FLARE Specialty Rolls, for Mittler Power Drive Bead Rollers
MADE IN THE USA
|
100.00 |
|
|
Due to COVID restrictions please call ud for availability. Apologies for the inconvenience.
Course prerequisite: we require that the student attend Metal Fabrication Workshop 1 prior to attending the Advanced Workshop. It is also essential that the student has practiced the skills taught in the first workshop in order to gain maximum benefit from the course.
WORKSHOP TUITION IS $1,200 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $400 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
400.00 |
|
|
Due to COVID restrictions please call us for class availability in 2021. Apologies for the inconvenience.
WORKSHOP TUITION IS $1,000 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $300 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
300.00 |
|
|
Now in one easy step you can flare sheet metal panels for improved strength & appearance.
Flare Tools Part #: 1300-F-Series
Product Description Flare sheet metal panels for improved strength and appearance.
Flare tool guide ring centers tooling in your pre-cut hole then draw together with supply bolt.
Easily mounts in our Mittler Brothers Bench Presses.
SET OF 9 FLARE TOOLS INCLUDES:
1/2" Flare Tool, Part # 1300-001
5/8" Flare Tool, Part # 1300-002
3/4" Flare Tool, Part # 1300-003
1" Flare Tool, Part # 1300-004
1-1/4" Flare Tool, Part # 1300-005
1-1/2" Flare Tool, Part # 1300-006
1-3/4" Flare Tool, Part # 1300-007
2" Flare Tool, Part # 1300-008
2-1/2" Flare Tool, Part # 1300-009
A $425 VALUE! (Flares may also be purchased individually, please call to order)
MADE IN THE USA
|
370.00 |
|
| |
|