|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
Congratulations to our lucky 2015 AutoRama winner, Joe Zidzik of Warren, MI. Joe won a 10-piece metal working tool kit valued at over $400
Thanks to all who entered the raffle!
P 800.501.3722 | fournierenterprises.com
|
|
|
One hour instructional DVD covering the DHC 2000 Torch and Regulator set up. Demonstrations of welding and cutting of ferrous and non ferrous materials throughout the video provide a full understanding of the DHC 2000 welding and cutting system.
|
29.00 |
|
|
Due to COVID restrictions please call us for class availability in 2021. Apologies for the inconvenience.
WORKSHOP TUITION IS $1,000 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $300 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
300.00 |
|
|
Due to COVID restrictions please call ud for availability. Apologies for the inconvenience.
Course prerequisite: we require that the student attend Metal Fabrication Workshop 1 prior to attending the Advanced Workshop. It is also essential that the student has practiced the skills taught in the first workshop in order to gain maximum benefit from the course.
WORKSHOP TUITION IS $1,200 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $400 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
400.00 |
|
|
LOUVER PRESS KIT
KIT INCLUDES:
10-ton hydraulic ram
Precision slide assembly
One set of louver dies included with purchase ( your choice of one 1" - 5", 3" dome or 4" dome )
Blueprints & complete instructions for you to build a 48" throat depth press.
FEATURES:
Punches Steel, Aluminum or Stainless
Punches up to 2" dia. hole
Up to 5" long louvers, depending on your choice of punch at time of purchase.
Optional louver die sets available
Please note: requires either Air Hydraulic Pump w/ 20' Hose or an electric hydraulic pump, each sold separately.
MADE IN USA
|
1815.00 |
|
|
Replacement Blade Kit for KETT Shear # KD-440, 14-ga shear.
Kit Includes:
40-21 center blade
60-22L left, side knife
60-22R right, side knife
|
45.50 |
|
|
Unwelded Standard Bench Mount English Wheel Kit
Kit Includes all machined parts, cut to length frame material, detailed step by step instructions and blueprints. A great value, especially if you have fabrication skills!
The photo above is Mittler Benchtop wheel that we built for the shop with a custom made stand. We needed an additional wheel that was high quality and didn't take up too much space. If you're looking for the same type of wheel look no further!
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1450.00 |
|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
|
Planishing hammers are a real 'workhorse' of the metal shaping process. They are unexcelled for flattening welds, working in constricted areas, and stretching flanges. Ron demonstrates the basic procedures for using these machines, including proper die selection and operator technique, and he shows their use on both steel and aluminum panels.
More specialized techniques are covered too, including flanging, riveting, and making reverse curves. This program shows seven different planishing hammers in action, from bargain-priced entry-level machines, through vintage and hand-held machines, to the most robust professional-level machines available, giving the viewer invaluable insight about the great diversity of these machines, and which features are most important for specific types of work.
As popular as planishing hammers are, there is precious little information available on their proper use, and this program will give you a strong foundation for selecting and using the right machine and tooling for your application.
54 min., #1000-29
|
40.00 |
|
| |
|