|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
ONE SIZE: 1-1/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1-3/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
145.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 2-1/2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 3" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
160.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
An extra-heavy duty post makes this hefty tool perform exceptionally well as a hand-held dolly. At the same time, it multi-functions like a traditional T-dolly.
The Handy T is especially helpful when working with a large piece of metal that requires a curved edge. It's also perfect when working in tight or confined spaces. We've found the Handy T invaluable in our shop for hood scoop projects and any time 're-forming' is needed (for example, around weld areas.)
MADE IN USA
|
29.00 |
|
|
7 title Fournier METAL SHAPING DVD SET
SET INCLUDES:
Metal Shaping: Blocking & Smoothing, 90 min.
How To Gas-Weld Aluminum, 60 min.
Bucks, Patterns & Forms, 60 min.
Hand Tools, 90 min.
Large Equipment, 90 min.
Hammerforming Techniques, 76 min. with Ron Covell and Ron Fournier
Motorcycle Metal Fabrication (2-dvd set), 105 min.
Special price $199!
That's 25% savings on more than 9 hours of high-quality Metal Work Instruction & Demonstration!
|
199.00 |
|
|
Sensible design and powerful pedal ratio make shrinking and stretching more effective and less labor intense.
Hands free operation allows better control of your metal work and much faster results! Sturdy construction and attractive finish makes the foot-operated shrinker / stretcher stand ideal for the hobbyist or professional metal shaper.
Features include:
Fabricated of .120 ga. wall tubing;
Stand height: 39 inch (with tools on stand the overall working height is approx. 41 inches;
Includes one Lancaster shrinker (TP371) and one Lancaster stretcher (TP372).
Note: we will not include handles unless requested.
Please note:
This item must be shipped separately from other items in your order.
Made In USA
|
725.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
| |
|