|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
|
SET OF 6 LOWER ANVILS #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
Check out the wheel (above) one of our workshop students built using these anvils!
INCLUDES:
2900-A0, FLAT anvil wheel
2900-A1, 12" Rad with 3/4" flat anvil wheel
2900-A2, 8-1/2" Rad with 1/2" flat anvil wheel
2900-A3, 5" Rad with 3/8" flat anvil wheel
2900-A4, 3-1/4" Rad with 1/4" flat anvil wheel
2900-A5, 2-3/8" Rad with 1/8" Flat anvil wheel
SAVE WHEN YOU BUY THE SET OF SIX! (Normally $95 ea.)
Made in USA
|
555.00 |
|
|
Unwelded Standard Bench Mount English Wheel Kit
Kit Includes all machined parts, cut to length frame material, detailed step by step instructions and blueprints. A great value, especially if you have fabrication skills!
The photo above is Mittler Benchtop wheel that we built for the shop with a custom made stand. We needed an additional wheel that was high quality and didn't take up too much space. If you're looking for the same type of wheel look no further!
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1450.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
BENCH MOUNT ENGLISH WHEEL
We are often asked for an affordable bench top wheel, and are pleased to offer this model. It's an affordable version for the home hobbyist or race enthusiast. Perfect for the custom shop in need of an extra shaping station that won't eat up a ton of space. This pre-welded unit arrives painted and completely finished as shown.
26-1/2" overall throat depth
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1680.00 |
|
|
The QuickSpaper Mark II combines a 32" throat English wheel with multiple workstations to perform a variety of essential metal shaping tasks!
Multi-Station Work Center designed by Ron Fournier...
The QuickShaper is a multitask metal working machine designed for metal work professionals and hobbyists alike. Ideal for small shops, where space - & time - are at a premium. The QuickShaper™ Mark II combines a 32" throat English wheel, with multiple workstations to perform...
Every essential metal shaping task:
Hammering / Blocking to pre-form custom aluminum or steel parts;
Wheeling and raising metal panels;
Shrinking or stretching;
Planishing - Perfect for small to medium sized parts like motorcycle tanks, hood scoops, fender flares and door skins. Now, even large parts are easily accommodated on this deeper throat wheel!
Every craftsman deserves flexibility and options to enhance creativity...
Our mobile forming center fits comfortably into small workspaces and is easily navigated around the shop. A variety of tasks may be performed right at the work station and the well-planned design provides convenient storage for forming accessories. It includes a generous 32" throat English wheel, and the upper wheel and anvil can be turned 90° to shape larger parts, as needed.
The QuickShaper provides an effective way to quickly form custom shapes in aluminum & steel. It's a multitask tool that enhances productivity for truly professional results!
Features:
32" English wheel ~ foot activated.
The upper portion of the QuickShaper is a 32" throat English wheel with 90 degree rotation feature for shaping larger parts and panels;
Quick release cam mechanism on the upper anvil.
Benefit: when placed back into operating position, the original pressure setting is immediately reestablished for streamlined shaping and efficiency;
6 forming anvils standard for a well equipped English wheel. Anvils are CNC'ed & polished;
Anvil Dimensions:
Each anvil is 2" wide x 2-½" in diameter with pressed-in sealed bearings and a ½" steel axle. Anvils are individually numbered 0 - 5, indicating the amount of crown, as follows:
#0, Completely flat, no crown
#1, 3/4" contact area
#2, 1/2" contact area
#3, 3/8" contact area.
#4, 1/4" contact area
#5, 1/8" contact area
Upper wheel:
The upper wheel is 2" wide x 4-1/2" in diameter. It also has pressed-in sealed bearings and a 1/2" steel axle. This upper wheel comes highly polished (nearly a mirror finish), which will produce parts with a beautiful surface.
Built for longevity and quality results:
Anvils are 8620 steel with deep case harden .015"-.020", 58-60 HRc
Custom lower storage area for extra forming heads, tools and equipment. Storage area accommodates storage of up to six Fournier forming heads around the perimeter of the tray;
Larger storage holes in upper tray to accommodate a variety of hammers & mallets of every size;
QuickShaper design summary:
Multi-Station design for efficient work space use and enhanced productivity;
Designed & manufactured by experts for maximum quality metal shaping results!
Made with pride in the USA;
Delivered assembled (less casters), ready for use.
Also includes EVEN MORE equipment you need for a complete metal shaping station:
Foot operated Lancaster Shrinker with interchangeable Lancaster Stretcher jaw;
Classic Bowl Forming Head;
Shot Bag 12" (unfilled);
2-¾" Plastic Bossing Mallet (# FBM02);
2-¾ Hickory Barrel Mallet (# MUM00);
Hard Wood Flat Slapper w/ leather face (# FFS001);
90 minute instructional DVD, Blocking & Smoothing, by Ron Fournier (# BSD00)
Review Set Up Instructions
WHEN ORDERING, PLEASE NOTE:
This equipment ships via motor freight only. The shipping charge for this item is ESTIMATED to be $300. (for destinations within the continental United States) Actual shipping is based on a variety of factors and will be calculated once your order is placed. Factory charges $50 crate fee, which is noted on the details of your shipping estimate.
You will be contacted with actual shipping prior to shipment and billed for shipping, separately.
QuickShaper Mark II # FQSM2
SHIPS TRUCK FREIGHT, 665 lbs., class 85
Price does not include sales tax, if applicable. (MI residents, 6%)
QuickShaper Mark II # FQSM2
|
5500.00 |
|
|
High quality and EXTENDED THROAT make this 42" Power Drive Bead Roller a VERSATILE performer!
FEATURES INCLUDE:
Heavy Duty All Fabricated Plate Steel Construction
Powder coated for good looks and durability
Heat treated gears for long life
Oillite bushings at all rotation points for long life
Forward and Reverse switch for left or right side operation
Adjustable depth of bead
Variable speed foot control for hands free operation
MADE IN THE USA
PLEASE NOTE: This product ships via motor freight only. Shipping charges for this item will NOT be reflected in the shopping cart. You will be contacted with a shipping quote prior to shipment.
|
1800.00 |
|
|
EDGE BEAD ROLLS, for Mittler Power Drive Bead Rollers
Built in edge guide makes a tough job easier. Designed to roll a strengthening bend around the edge of a panel. Works great for wheel wells too!
We offer a variety of Edge Bead Rolls. Simply choose one at a time from the drop down box below and add to cart. Add as many as you like.
Bead rolls are 2-3/4" ID x 3/4" ID x 1" wide (bead centered on roll width).
MADE IN THE USA
|
70.00 |
|
|
4 INCH THROAT BEAD ROLLS FOR the Mittler Brothers 204-24, 204-24NV, 204-36 and 204-36NV Bead Rollers.
Dozens of shapes available!
Select one at a time from the drop down field and add as many as you like to your cart.
Made in the USA
|
105.00 |
|
|
50" Length Slip Roll
Features Include:
Solid Precision Ground Rollers not Tubing
Heavy Cast Iron Frame
Quick Release Top Roll
Hardened Steel Gears
Easy to Use
PLEASE NOTE: This product ships via motor freight only. Shipping charges for this item will NOT be reflected in the shopping cart. You will be contacted with a shipping quote prior to shipment.
|
1950.00 |
|
| |
|