|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
Ron shows and explains a variety of bucks. Step-by-step demonstration on building a sectional fender buck. Additional topics include: material & fastening recommendations, determining the frequency of stations, construction differences between single use and low-production bucks.
60 min. DVD, BPD00
|
30.00 |
|
|
SET OF 6 LOWER ANVILS #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
Check out the wheel (above) one of our workshop students built using these anvils!
INCLUDES:
2900-A0, FLAT anvil wheel
2900-A1, 12" Rad with 3/4" flat anvil wheel
2900-A2, 8-1/2" Rad with 1/2" flat anvil wheel
2900-A3, 5" Rad with 3/8" flat anvil wheel
2900-A4, 3-1/4" Rad with 1/4" flat anvil wheel
2900-A5, 2-3/8" Rad with 1/8" Flat anvil wheel
SAVE WHEN YOU BUY THE SET OF SIX! (Normally $95 ea.)
Made in USA
|
555.00 |
|
|
A necessity for Metal Workers! Ron's popular follow-up reference book to Metal Fabricator's Handbook.
INSIDE YOU WILL FIND TIPS ON: Setting up your own shop, proper use of the English wheel, basic metal shaping techniques, the art of hammerforming, proper riveting techniques, and tips on restoring original sheet metal.
Fully illustrated how-to sequences are included, along with many photos to develop sheet metal skills.
|
28.00 |
|
|
HEM ROLL, for Mittler Power Drive Bead Rollers
STEP #1 Forms the metal 90 degrees
Add strength and safety to every job with Hem Rolls, a productive addition to your Mittler Brother Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep on steel or aluminum up to .040" without marring pre-painted aluminum. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
100.00 |
|
|
TIP #1 for DHC2000 Torch.
Identified by single groove on barrel. For use in welding materials of 1.5mm to 30mm (1/16″ – 1/8″).
This tip is included with the purchase of a DHC 2000 Torch Kit.
Manufactured with pride in the USA by Cobra Torches
|
26.00 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
BEAD ROLLER Learning Package
You save 20% on three of our most popular Bead Roller DVDs:
The Art of Bead Rolling, Vol. 1, DVD by Jamey Jordan;
Beading Machine Basics DVD by Ron Covell;
The Art of Bead Rolling, Vol. 2, DVD by Jamey Jordan;
|
76.00 |
|
|
Tip #1.5 for DHC2000 Torch.
We recommend having as many tip sizes as possible for your DHC2000 torch, and we're glad ½ size tips are now available.
When working with low line pressure, it is very important to match the tip size to the metal being welded. For instance, for .050 aluminum we use the #1 tip and for .080 aluminum we use the #2 tip. In the past Ron and Dan debated over which tip to use on .063 aluminum: Dan liked the #2 tip and Ron preferred the #1 tip. But, now everyone's happy using the 1.5 tip in that situation.
Identified by one full and one partial groove on barrel. For use in welding materials of 3 mm to 6 mm and 3/16″ to 1/8″
This tip is included with the purchase of every DHC 2000 Torch Kit.
Manufactured with pride in the USA by Cobra Torches
|
26.00 |
|
| |
|