|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
Sheet Metal Machines
Traditional metal shaping machines like bead rollers, planishing hammers, brakes and English wheels are essential sheet metal shop equipment.
|
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
This program covers many advanced topics in TIG welding, including welding chrome moly steel, stainless steel, aluminum, magnesium, bronze, copper, and titanium. You’ll also learn how to weld castings made from aluminum, magnesium, and bronze. Clear guidelines are given for using the pulse and waveform adjustments that many new welders have, along with great practical advice on machine setup, joint preparation, and weld finishing.
Ron’s clear and detailed instructions are easy to follow, and the striking close-up photography shows you exactly what to look for as you weld!
111 min., #1000-25
|
40.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Made in USA
|
180.00 |
|
|
Ron shows and explains a variety of bucks. Step-by-step demonstration on building a sectional fender buck. Additional topics include: material & fastening recommendations, determining the frequency of stations, construction differences between single use and low-production bucks.
60 min. DVD, BPD00
|
30.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Please note:
If you order optional Foot Operated Shrinker Stand (SSF2005) with this tool, we will not incude handle unless requested at the time of order.
MADE IN THE USA, by LANCASTER
|
180.00 |
|
|
A selection of 6 back issues from our remaining stock of Metal Crafter's News.
Metal Crafter's News®, The Journal of Metal Fabrication Published by Ron Fournier
This was a bimonthly magazine created specifically for metal craftsman and automotive enthusiasts in the mid to late 90's. Metal Crafter's News focused on custom metal shaping for the automotive, aircraft and motorcycle industries.
Ron used MCN to share more than 35 years of experience & insight on a variety of topics, including: tips & techniques, craftsman profiles, projects & patterns, new construction, restoration, tool & product reviews and more.
Please note: these have been out of print for quite a few years. We have a remaining surplus of some issues and offer them for those still interested. Please call if you have any questions reagrding availability of a specific issue.
|
20.00 |
|
| |
|