|
|
Bulls-eye picks were originally designed for the collision / dent repair trade, and also work very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. This kit includes the 15 inch AND 25 inch throat models.
Bulls-eye picks are especially handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
1 year manufacturer's warranty
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
INCLUDES:
15 inch reach bulls-eye pick
25 inch reach bulls-eye pick
Includes Standard and blunt tips
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for international customers correctly. Thank you for your understanding.
|
295.00 |
|
|
Sheet Metal Machines
Traditional metal shaping machines like bead rollers, planishing hammers, brakes and English wheels are essential sheet metal shop equipment.
|
|
|
BLUNT TIP (ACCESSORY) FOR BULLSEYE PICKS
Optional blunt tip for use with standard bullseye picks. (Note: Our picks DO include the blunt tip.) This is a replacement part, add on for those who own a pick with the "sharp" tip.
1 year manufacturer's warranty
Made in USA
|
25.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 15 inch throat, it is handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
|
155.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 25 inch throat, it is handy for large panels or for a hard to reach dent. The open site gives the user a clear target for the tip to strike.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for non-US customers correctly. Thank you for your understanding.
|
165.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Made in USA
|
180.00 |
|
|
SET OF 6 LOWER ANVILS #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
Check out the wheel (above) one of our workshop students built using these anvils!
INCLUDES:
2900-A0, FLAT anvil wheel
2900-A1, 12" Rad with 3/4" flat anvil wheel
2900-A2, 8-1/2" Rad with 1/2" flat anvil wheel
2900-A3, 5" Rad with 3/8" flat anvil wheel
2900-A4, 3-1/4" Rad with 1/4" flat anvil wheel
2900-A5, 2-3/8" Rad with 1/8" Flat anvil wheel
SAVE WHEN YOU BUY THE SET OF SIX! (Normally $95 ea.)
Made in USA
|
555.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Please note:
If you order optional Foot Operated Shrinker Stand (SSF2005) with this tool, we will not incude handle unless requested at the time of order.
MADE IN THE USA, by LANCASTER
|
180.00 |
|
|
A selection of 6 back issues from our remaining stock of Metal Crafter's News.
Metal Crafter's News®, The Journal of Metal Fabrication Published by Ron Fournier
This was a bimonthly magazine created specifically for metal craftsman and automotive enthusiasts in the mid to late 90's. Metal Crafter's News focused on custom metal shaping for the automotive, aircraft and motorcycle industries.
Ron used MCN to share more than 35 years of experience & insight on a variety of topics, including: tips & techniques, craftsman profiles, projects & patterns, new construction, restoration, tool & product reviews and more.
Please note: these have been out of print for quite a few years. We have a remaining surplus of some issues and offer them for those still interested. Please call if you have any questions reagrding availability of a specific issue.
|
20.00 |
|
|
John Glover has done a tremendous job of describing and illustrating techniques refined and perfected over a lifetime of unparalleled metal shaping successes in The Practical Sheet Metal Worker.
The book is divided into sections that include working the edges of metal parts, like beading, forming a wire edge and turning a flange. There is also a wealth of information on shrinking, tucking and heat shrinking. A section on making louvers is particularly helpful. The 'finishing touches' described in the book can enhance any metal shaping project, from basic to very advanced. Happily, John covers metal fabrication details and fine points in true English form - with excellent clarity and exquisite attention to detail.
Antique race cars, motorcycle gas tanks, aircraft parts and many other projects are all covered. Readers will enjoy John's perspective and personal touch along with intriguing information from days gone by. It’s full of valuable information about the hand forming of metal parts used in restoration, prototype, race and custom cars.
|
26.75 |
|
| |
|