|
|
7 title Fournier METAL SHAPING DVD SET
SET INCLUDES:
Metal Shaping: Blocking & Smoothing, 90 min.
How To Gas-Weld Aluminum, 60 min.
Bucks, Patterns & Forms, 60 min.
Hand Tools, 90 min.
Large Equipment, 90 min.
Hammerforming Techniques, 76 min. with Ron Covell and Ron Fournier
Motorcycle Metal Fabrication (2-dvd set), 105 min.
Special price $199!
That's 25% savings on more than 9 hours of high-quality Metal Work Instruction & Demonstration!
|
199.00 |
|
|
Metal Shaping Books & DVDs
Instructional books and films from top Metal Shaping industry experts!
|
|
|
Metal Finishing
Weld finishing and final planishing are achieved with some of the metal working "tools of the trade"
|
|
|
SET OF 6 LOWER ANVILS #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
Check out the wheel (above) one of our workshop students built using these anvils!
INCLUDES:
2900-A0, FLAT anvil wheel
2900-A1, 12" Rad with 3/4" flat anvil wheel
2900-A2, 8-1/2" Rad with 1/2" flat anvil wheel
2900-A3, 5" Rad with 3/8" flat anvil wheel
2900-A4, 3-1/4" Rad with 1/4" flat anvil wheel
2900-A5, 2-3/8" Rad with 1/8" Flat anvil wheel
SAVE WHEN YOU BUY THE SET OF SIX! (Normally $95 ea.)
Made in USA
|
555.00 |
|
|
Sensible design and powerful pedal ratio make shrinking and stretching more effective and less labor intense.
Hands free operation allows better control of your metal work and much faster results! Sturdy construction and attractive finish makes the foot-operated shrinker / stretcher stand ideal for the hobbyist or professional metal shaper.
Features include:
Fabricated of .120 ga. wall tubing;
Stand height: 39 inch (with tools on stand the overall working height is approx. 41 inches;
Includes one Lancaster shrinker (TP371) and one Lancaster stretcher (TP372).
Note: we will not include handles unless requested.
Please note:
This item must be shipped separately from other items in your order.
Made In USA
|
725.00 |
|
|
Due to COVID restrictions please call us for class availability in 2021. Apologies for the inconvenience.
WORKSHOP TUITION IS $1,000 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $300 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
300.00 |
|
|
BOSSING MALLET SET INCLUDES:
Each Bossing Mallet has two radii for added usefulness:
FBM01: Small radius dia: ½", Large radius dia. 2-¼" (shown right)
An elegantly shaped, custom-made tool. Versatile and effective for aluminum and mild steel projects.
FBM02: Small radius dia: ¾", Large radius dia. 1-3/8" (shown middle)
A best seller! Nicely balanced and easy to handle.
FBM03: Small radius dia. 1", Large radius dia. 3" (shown left)
At 26 ounces, this mallet moves metal fast! The heaviest of all our bossing-style mallets, this is a great choice when working with steel.
Pair with the shot bag of your choice for truly professional results!
#FBMSET, MADE IN USA
|
136.00 |
|
|
Due to COVID restrictions please call ud for availability. Apologies for the inconvenience.
Course prerequisite: we require that the student attend Metal Fabrication Workshop 1 prior to attending the Advanced Workshop. It is also essential that the student has practiced the skills taught in the first workshop in order to gain maximum benefit from the course.
WORKSHOP TUITION IS $1,200 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $400 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
400.00 |
|
|
Bulls-eye picks were originally designed for the collision / dent repair trade, and also work very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. This kit includes the 15 inch AND 25 inch throat models.
Bulls-eye picks are especially handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
1 year manufacturer's warranty
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
INCLUDES:
15 inch reach bulls-eye pick
25 inch reach bulls-eye pick
Includes Standard and blunt tips
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for international customers correctly. Thank you for your understanding.
|
295.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
| |
|