|
|
Anvil Wheels Part #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
> Available in 6 shapes, select from drop down menu below <
Made in USA
** Free Ground Shipping on this item! **
Valid on orders shipped in the contiguous United States only. Shipping charge for international orders will appear as a seperate transaction on your credit card.
|
100.00 |
|
|
Upper Wheel - 7" OD
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity.
Made in USA
|
210.00 |
|
|
SET OF 6 LOWER ANVILS #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
Check out the wheel (above) one of our workshop students built using these anvils!
INCLUDES:
2900-A0, FLAT anvil wheel
2900-A1, 12" Rad with 3/4" flat anvil wheel
2900-A2, 8-1/2" Rad with 1/2" flat anvil wheel
2900-A3, 5" Rad with 3/8" flat anvil wheel
2900-A4, 3-1/4" Rad with 1/4" flat anvil wheel
2900-A5, 2-3/8" Rad with 1/8" Flat anvil wheel
SAVE WHEN YOU BUY THE SET OF SIX! (Normally $95 ea.)
Made in USA
|
555.00 |
|
|
English wheels for metal shaping
We offer full-size, bench top and kits so that you can find the perfect English wheel for your metal shaping project!
|
|
|
Floor Stand w/ Locking Casters
This Optional Floor Stand works with all of the tools listed below and is adaptable to most other manufacturers tools as well. Locking casters allow unparalleled maneuverability. A storage shelf makes it easy to keep track of spare items.
Will fit the products listed: #2210-H Hydraulic Bench Press, #2900 English Wheel and #2900-K English Wheel KIT
Made in USA
|
380.00 |
|
|
Unwelded Standard Bench Mount English Wheel Kit
Kit Includes all machined parts, cut to length frame material, detailed step by step instructions and blueprints. A great value, especially if you have fabrication skills!
The photo above is Mittler Benchtop wheel that we built for the shop with a custom made stand. We needed an additional wheel that was high quality and didn't take up too much space. If you're looking for the same type of wheel look no further!
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1450.00 |
|
|
BENCH MOUNT ENGLISH WHEEL
We are often asked for an affordable bench top wheel, and are pleased to offer this model. It's an affordable version for the home hobbyist or race enthusiast. Perfect for the custom shop in need of an extra shaping station that won't eat up a ton of space. This pre-welded unit arrives painted and completely finished as shown.
26-1/2" overall throat depth
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1680.00 |
|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
|
This unique design from MetalAce is a great mid-sized wheel. It is well suited for heavy forming, and yet sized to fit perfectly in small shops. The 3-leg design includes rubber feet for a steady grip on all floors, while the retractable handle and tip-back casters allow easy mobility. A great on-the-go metal forming machine; perfect for racing needs, coachbuilding, hot-rod building, vintage aircraft restoration, and sculpture work. The sturdy jack mechanism offers a quick-release anvil yoke and precision alignment adjusters. The easy to use alignment adjusters make quick work of truing the anvil to the top wheel, as well as offsetting the lower anvil for reverse curve and edging operations.
The MetalAce 30F Classic Series English Wheel is made in the USA with pride, using heavy wall tubular construction. The machine is powder-coated for a professional, durable finish.
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
(1) 8 x 3 inch upper wheel
Warranty: 1 year manufacturer's warranty
#MA30F, MADE IN USA
WHEN ORDERING, PLEASE NOTE:
This equipment ships via truck freight. The shipping charge for this item will be ESTIMATED during checkout. Actual shipping is based on a variety of factors and will be verified once your order is placed. You will be contacted with actual shipping prior to shipment and billed separately, if necessary.
SHIPS TRUCK FREIGHT, 373 lbs., class 85
Price does not include sales tax, if applicable (MI residents, 6%).
|
3400.00 |
|
|
Are you looking for a workhorse wheeling machine? We’re pleased to introduce the MetalAce 44F Classic Series English wheel! Mounted on 3” casters, the sturdy welded frame offers extreme durability and proven stiffness for race car fabrication, auto restoration and aircraft rebuilding. This is the same machine seen in top NASCAR and hot rod shops around the country and is recommended by renowned metal shaper Ron Covell.
This machine features a quick-release screw lift assembly that raises and lowers the anvil wheel with a 90 degree handle rotation. This feature makes it easy for you to remove the metal and return back to the original pressure setting. The anvils can be changed quickly and easily in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the upper wheel which can be articulated in any axis.
This English wheel is proudly made in the USA using heavy wall tubular construction and is powdercoated for extra durability. Brand new features include gusseted throat and convenient anvil tray.
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
(1) 8 x 3 inch upper wheel
Casters
Warranty: 1 year manufacturer's warranty
#MA44F, MADE IN USA
WHEN ORDERING, PLEASE NOTE:
This equipment ships via truck freight. The shipping charge for this item will be ESTIMATED during checkout. Actual shipping is based on a variety of factors and will be verified once your order is placed. You will be contacted with actual shipping prior to shipment and billed separately, if necessary.
MA44F – Ships at 373 lbs, 62 x 42 x 75 class 85. Palletized.
Price does not include sales tax, if applicable (MI residents, 6%).
|
3400.00 |
|
| |
|