|
|
A necessity for Metal Workers! Ron's popular follow-up reference book to Metal Fabricator's Handbook.
INSIDE YOU WILL FIND TIPS ON: Setting up your own shop, proper use of the English wheel, basic metal shaping techniques, the art of hammerforming, proper riveting techniques, and tips on restoring original sheet metal.
Fully illustrated how-to sequences are included, along with many photos to develop sheet metal skills.
|
28.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
A selection of 6 back issues from our remaining stock of Metal Crafter's News.
Metal Crafter's News®, The Journal of Metal Fabrication Published by Ron Fournier
This was a bimonthly magazine created specifically for metal craftsman and automotive enthusiasts in the mid to late 90's. Metal Crafter's News focused on custom metal shaping for the automotive, aircraft and motorcycle industries.
Ron used MCN to share more than 35 years of experience & insight on a variety of topics, including: tips & techniques, craftsman profiles, projects & patterns, new construction, restoration, tool & product reviews and more.
Please note: these have been out of print for quite a few years. We have a remaining surplus of some issues and offer them for those still interested. Please call if you have any questions reagrding availability of a specific issue.
|
20.00 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
|
Metalworking Tools & Kits
Fournier signature metalworking tools and metalworking tool kits are popular with metal fabricators world-wide!
|
|
|
Metal work tools hand-picked for every day usefulness in custom metal fabrication shops!
|
|
| |
|