|
|
Punch and Flares / Punches
Automotive Punch and Flare tools made in the USA!
|
|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Eckold Metal Forming Tools
Eckold tools are available for shrinking, stretching, doming, planishing, flattening, straightening, flanging, notching, punching and edging of sheet metal parts!
|
|
|
Now in one easy step you can flare sheet metal panels for improved strength & appearance.
Flare Tools Part #: 1300-F-Series
Product Description Flare sheet metal panels for improved strength and appearance.
Flare tool guide ring centers tooling in your pre-cut hole then draw together with supply bolt.
Easily mounts in our Mittler Brothers Bench Presses.
SET OF 9 FLARE TOOLS INCLUDES:
1/2" Flare Tool, Part # 1300-001
5/8" Flare Tool, Part # 1300-002
3/4" Flare Tool, Part # 1300-003
1" Flare Tool, Part # 1300-004
1-1/4" Flare Tool, Part # 1300-005
1-1/2" Flare Tool, Part # 1300-006
1-3/4" Flare Tool, Part # 1300-007
2" Flare Tool, Part # 1300-008
2-1/2" Flare Tool, Part # 1300-009
A $425 VALUE! (Flares may also be purchased individually, please call to order)
MADE IN THE USA
|
370.00 |
|
|
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
|
860.00 |
|
|
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
|
720.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼") in metal thickness of .040” to .065” aluminum and mild steel.
The total clearance after the punch/flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1-1/2" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
135.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard ) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼”) in metal thickness of .040” to .065” aluminum and mile steel.
The total clearance after the punch / flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
ONE SIZE: 1-1/4" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
| |
|