|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
A necessity for Metal Workers! Ron's popular follow-up reference book to Metal Fabricator's Handbook.
INSIDE YOU WILL FIND TIPS ON: Setting up your own shop, proper use of the English wheel, basic metal shaping techniques, the art of hammerforming, proper riveting techniques, and tips on restoring original sheet metal.
Fully illustrated how-to sequences are included, along with many photos to develop sheet metal skills.
|
28.00 |
|
|
Featuring Ron Fournier & Ron Covell
Two of the best-known names in metalshaping have teamed up to teach you the ins and outs of the hammerforming process. The two Ron's bring over 70 years of combined experience to their viewers, and you will see how their individual styles of working with metal compliment each other.
Hammerforms are very easy to make, and they enable you to create parts that have the look and accuracy of die-stamped parts. Even beginning metalworkers can use hammerforms to quickly and easily make parts of which they can be proud.
Ten different hammerforming operations are demonstrated, from simple tank tops to a beautiful rolled edge detail on a complicated pontoon Bugatti fender.
The film includes instruction and demonstrations on the following topics:
Tank Top
Grille Bar
Annealing
Chipmunk Tombstone
Bowl Shapes
Flying Wire Fairing
Wing Rib
Door Post
Naca Duct
Bicycle Seat Post
Bugatti Fender
Featuring striking close-up shots that bring you close to the action, and clear descriptions of every aspect of the hammerforming process.
Length, 76 min. #HFD00 (1000-15)
|
10.00 |
|
|
Ron Covell demonstrates dozens of ways to work with tubing, including bending with heat, bending with tube bending machines (both inexpensive and high-end machines), mitering, flaring and tapering tubing.
An extensive section deals with using U-bends, showing how to create anything from simple water pipes to elaborate headers.
One of Ron's most popular videos ~ great information communicated concisely with lots of close up shots!
DVD, 95 min., #WTV01 (1000-4)
|
40.00 |
|
|
BEAD ROLLER Learning Package
You save 20% on three of our most popular Bead Roller DVDs:
The Art of Bead Rolling, Vol. 1, DVD by Jamey Jordan;
Beading Machine Basics DVD by Ron Covell;
The Art of Bead Rolling, Vol. 2, DVD by Jamey Jordan;
|
76.00 |
|
|
Sensible design and powerful pedal ratio make shrinking and stretching more effective and less labor intense.
Hands free operation allows better control of your metal work and much faster results! Sturdy construction and attractive finish makes the foot-operated shrinker / stretcher stand ideal for the hobbyist or professional metal shaper.
Features include:
Fabricated of .120 ga. wall tubing;
Stand height: 39 inch (with tools on stand the overall working height is approx. 41 inches;
Includes one Lancaster shrinker (TP371) and one Lancaster stretcher (TP372).
Note: we will not include handles unless requested.
Please note:
This item must be shipped separately from other items in your order.
Made In USA
|
725.00 |
|
|
DHC 2000 Welding & Cutting Torch
This professional torch kit comes with everything needed for welding, brazing and cutting almost any material.
KIT INCLUDES:
DHC2000 torch body
Five welding tips (#0, #.5, #1, #2 and #3)
Tip Cleaner
Wrench
Check valves
Over cutter attachment (The overcutter curves over the welding tip to provide a PULL cut. It is used when cutting mild steel from 1/8″ – 1″. Also includes a guide wheel assembly for a steady hand while making long straight or pattern cuts. The rails can be staggered to perform angle or bevel cuts. They fit both the undercutter and the overcutter.
Under cutter attachment (Undercutter attaches under the welding tip for cutting thin sheet metal. This is generally referred to as a PUSH cut. It is used for cutting 28-16 gage 1/64″ – 1/16″ material.)
Instructional manual
Ron Fournier's "How to Gas Weld Aluminum" DVD!
Manufactured with pride in the USA by Detroit Torch.
Please Note:
Torch kit and accessories are not available for shipment to the following countries: Australia, Sweden, New Zealand. Thank you for your understanding.
Torch kit has AMERICAN threads.
|
450.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
|
Metal Shaping Books & DVDs
Instructional books and films from top Metal Shaping industry experts!
|
|
| |
|