|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
Sheet Metal Machines
Traditional metal shaping machines like bead rollers, planishing hammers, brakes and English wheels are essential sheet metal shop equipment.
|
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
Gas Welding supplies and equipment
Gas-welding (commonly called oxyacetylene welding or oxy-fuel welding) is one of the oldest welding processes, and is the preferred method for joining non-structural aluminum panels.
|
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Made in USA
|
180.00 |
|
|
Ron shows and explains a variety of bucks. Step-by-step demonstration on building a sectional fender buck. Additional topics include: material & fastening recommendations, determining the frequency of stations, construction differences between single use and low-production bucks.
60 min. DVD, BPD00
|
30.00 |
|
| |
|