|
|
AMCO 22 brand aluminum welding flux, 8-oz. container. Used for welding aluminum & alloys.
This flux will produce a strong, non-porous weld by keeping the base metal and rod free of oxides during welding. Considered the benchmark industry flux for the welding of aluminum. Conforms to AMS 3414A.
How To Use:
Mix with water to form a paste and apply to both rod and base metal. After welding, remove residue with warm water. Recommended for use with #1100 bare aluminum.
Need a larger container? Also available in 16 oz.
|
25.00 |
|
|
AMCO 22 brand aluminum welding flux, large, 16-oz. container. Used for welding aluminum & alloys.
This flux will produce a strong, non-porous weld by keeping the base metal and rod free of oxides during welding. Considered the benchmark industry flux for the welding of aluminum. Conforms to AMS 3414A.
How To Use:
Mix with water to form a paste and apply to both rod and base metal. After welding, remove residue with warm water. Recommended for use with #1100 bare aluminum.
|
45.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
Gas Welding supplies and equipment
Gas-welding (commonly called oxyacetylene welding or oxy-fuel welding) is one of the oldest welding processes, and is the preferred method for joining non-structural aluminum panels.
|
|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
This program covers many advanced topics in TIG welding, including welding chrome moly steel, stainless steel, aluminum, magnesium, bronze, copper, and titanium. You’ll also learn how to weld castings made from aluminum, magnesium, and bronze. Clear guidelines are given for using the pulse and waveform adjustments that many new welders have, along with great practical advice on machine setup, joint preparation, and weld finishing.
Ron’s clear and detailed instructions are easy to follow, and the striking close-up photography shows you exactly what to look for as you weld!
111 min., #1000-25
|
40.00 |
|
| |
|