|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
Metal Shaping Books & DVDs
Instructional books and films from top Metal Shaping industry experts!
|
|
|
Gas Welding supplies and equipment
Gas-welding (commonly called oxyacetylene welding or oxy-fuel welding) is one of the oldest welding processes, and is the preferred method for joining non-structural aluminum panels.
|
|
|
AMCO 22 brand aluminum welding flux, 8-oz. container. Used for welding aluminum & alloys.
This flux will produce a strong, non-porous weld by keeping the base metal and rod free of oxides during welding. Considered the benchmark industry flux for the welding of aluminum. Conforms to AMS 3414A.
How To Use:
Mix with water to form a paste and apply to both rod and base metal. After welding, remove residue with warm water. Recommended for use with #1100 bare aluminum.
Need a larger container? Also available in 16 oz.
|
25.00 |
|
|
AMCO 22 brand aluminum welding flux, large, 16-oz. container. Used for welding aluminum & alloys.
This flux will produce a strong, non-porous weld by keeping the base metal and rod free of oxides during welding. Considered the benchmark industry flux for the welding of aluminum. Conforms to AMS 3414A.
How To Use:
Mix with water to form a paste and apply to both rod and base metal. After welding, remove residue with warm water. Recommended for use with #1100 bare aluminum.
|
45.00 |
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
DHC 2000 Welding & Cutting Torch
This professional torch kit comes with everything needed for welding, brazing and cutting almost any material.
KIT INCLUDES:
DHC2000 torch body
Five welding tips (#0, #.5, #1, #2 and #3)
Tip Cleaner
Wrench
Check valves
Over cutter attachment (The overcutter curves over the welding tip to provide a PULL cut. It is used when cutting mild steel from 1/8″ – 1″. Also includes a guide wheel assembly for a steady hand while making long straight or pattern cuts. The rails can be staggered to perform angle or bevel cuts. They fit both the undercutter and the overcutter.
Under cutter attachment (Undercutter attaches under the welding tip for cutting thin sheet metal. This is generally referred to as a PUSH cut. It is used for cutting 28-16 gage 1/64″ – 1/16″ material.)
Instructional manual
Ron Fournier's "How to Gas Weld Aluminum" DVD!
Manufactured with pride in the USA by Detroit Torch.
Please Note:
Torch kit and accessories are not available for shipment to the following countries: Australia, Sweden, New Zealand. Thank you for your understanding.
Torch kit has AMERICAN threads.
|
450.00 |
|
| |
|