|
|
Sheet Metal Machines
Traditional metal shaping machines like bead rollers, planishing hammers, brakes and English wheels are essential sheet metal shop equipment.
|
|
|
Unwelded Standard Bench Mount English Wheel Kit
Kit Includes all machined parts, cut to length frame material, detailed step by step instructions and blueprints. A great value, especially if you have fabrication skills!
The photo above is Mittler Benchtop wheel that we built for the shop with a custom made stand. We needed an additional wheel that was high quality and didn't take up too much space. If you're looking for the same type of wheel look no further!
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1450.00 |
|
|
English wheels for metal shaping
We offer full-size, bench top and kits so that you can find the perfect English wheel for your metal shaping project!
|
|
|
BENCH MOUNT ENGLISH WHEEL
We are often asked for an affordable bench top wheel, and are pleased to offer this model. It's an affordable version for the home hobbyist or race enthusiast. Perfect for the custom shop in need of an extra shaping station that won't eat up a ton of space. This pre-welded unit arrives painted and completely finished as shown.
26-1/2" overall throat depth
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1680.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Made in USA
|
180.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Please note:
If you order optional Foot Operated Shrinker Stand (SSF2005) with this tool, we will not incude handle unless requested at the time of order.
MADE IN THE USA, by LANCASTER
|
180.00 |
|
|
John Glover has done a tremendous job of describing and illustrating techniques refined and perfected over a lifetime of unparalleled metal shaping successes in The Practical Sheet Metal Worker.
The book is divided into sections that include working the edges of metal parts, like beading, forming a wire edge and turning a flange. There is also a wealth of information on shrinking, tucking and heat shrinking. A section on making louvers is particularly helpful. The 'finishing touches' described in the book can enhance any metal shaping project, from basic to very advanced. Happily, John covers metal fabrication details and fine points in true English form - with excellent clarity and exquisite attention to detail.
Antique race cars, motorcycle gas tanks, aircraft parts and many other projects are all covered. Readers will enjoy John's perspective and personal touch along with intriguing information from days gone by. It’s full of valuable information about the hand forming of metal parts used in restoration, prototype, race and custom cars.
|
26.75 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
12" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard:
Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12"
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
950.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
24" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard: Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12".
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
1100.00 |
|
|
The MetalAce 44F U-weld English Wheel Kit
This kit provides all the components necessary to build the popular 44F, a go-anywhere wheeling machine to meet all your metal shaping needs. Use the supplied blueprints to build a replica of our frame, or add your own creativity and customize your frame and use our high quality wheels and components.
The included screw lift assembly has a quick-release cam mechanism that lowers the anvil yoke with a 90 degree rotation of the handle. This makes it easy to get the material out and return back to the original pressure setting, plus the anvils can be changed quickly in this fashion. The anvil yoke has precision adjustments on both sides of the axle support to true the anvil with the top wheel. (Material for the frame is not included.)
Check out the wheel designed by Jeff Fournier and built by one of our workshop students using this kit!
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
8 x 3 inch upper wheel
Jack, kick wheel, yoke, and hardware
Floor casters
Bill of materials and blueprints
MADE IN USA
|
1900.00 |
|
| |
|