|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
Metal Shaping Books & DVDs
Instructional books and films from top Metal Shaping industry experts!
|
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
|
|
|
Due to COVID restrictions please call us for class availability in 2021. Apologies for the inconvenience.
WORKSHOP TUITION IS $1,000 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $300 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
300.00 |
|
|
Due to COVID restrictions please call ud for availability. Apologies for the inconvenience.
Course prerequisite: we require that the student attend Metal Fabrication Workshop 1 prior to attending the Advanced Workshop. It is also essential that the student has practiced the skills taught in the first workshop in order to gain maximum benefit from the course.
WORKSHOP TUITION IS $1,200 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $400 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
400.00 |
|
|
Sections include: Tool selection and use, MIG, TIG, arc- and gas-welding, Fuel and oil tanks, Exhaust headers, Roll bars and roll cages, Sheet metal interiors and Basic metal shaping.
This practical book shows how to build structurally sound, good looking metal parts for custom street rods, race cars or restorations. Over 350 step-by-step photos and instructions illustrate proper welding, metal shaping and design techniques.
"For the reader with more than a passing interest in automotive fabrication, this book is an excellent acquisition." -Road & Track
MOTO Award Winner for Best Technical How-to Book in 1984
|
25.00 |
|
|
OVAL PUNCH AND FLARE SET
These Mittler Brothers / Jamey Jordan Signature Series Oval Punch & Flare tools can create a unique oval shaped hole, with or without a flare in one easy step. Simply drill two pilot holes using the included template for the alignment pins, then place the tooling and material in a press. These oval punch and flare tools are precision machined from tool steel and heat-treated to a Rockwell hardness of 58 for years of use. They also feature a 16 gauge mild steel maximum capacity.
SPECIFICATIONS:
Finish Hole (inches): 1-¼ x 2, 1-¾ x 2-¾, 2 x 3-¼
Flare Height (inches): 1/4 (approximate)
Construction: heat treated steel
SET INCLUDES:
1-1/4 x 2 inch punch and flare tool
1-3/4 x 2-3/4 inch punch and flare tool
2 x 3-1/4 inch punch and flare tool
Universal press block
Material Thickness Capacity:
Aluminum (.060”)
Mild Steel (.060”)
Stainless Steel (.040”)
MADE IN USA, PART #1320-100
|
1465.00 |
|
|
Sensible design and powerful pedal ratio make shrinking and stretching more effective and less labor intense.
Hands free operation allows better control of your metal work and much faster results! Sturdy construction and attractive finish makes the foot-operated shrinker / stretcher stand ideal for the hobbyist or professional metal shaper.
Features include:
Fabricated of .120 ga. wall tubing;
Stand height: 39 inch (with tools on stand the overall working height is approx. 41 inches;
Includes one Lancaster shrinker (TP371) and one Lancaster stretcher (TP372).
Note: we will not include handles unless requested.
Please note:
This item must be shipped separately from other items in your order.
Made In USA
|
725.00 |
|
|
Foot Operated Shrinker / Stretcher Stand
Sensible design and powerful pedal ratio make shrinking and stretching more effective and less labor intense. Will make any standard metal shrinker or stretcher a more productive and useful machine.
Hands free operation allows better control of your metal work and much faster results! Sturdy construction and attractive finish makes the foot-operated shrinker / stretcher stand ideal for the hobbyist or professional metal shaper.
Features include:
Fabricated of .120 ga. wall tubing
Stand height: 39 inch (with tools on stand the overall working height is approx. 41 inches)
Made in the USA
Please note:
Tools are NOT included with purchase of stand.
If you order optional tools, (shrinker, stretcher or SET) with this stand, we will not incude handles unless requested)
This item must be shipped separately from other items in your order.
|
385.00 |
|
| |
|