|
|
One hour instructional DVD covering the DHC 2000 Torch and Regulator set up. Demonstrations of welding and cutting of ferrous and non ferrous materials throughout the video provide a full understanding of the DHC 2000 welding and cutting system.
|
29.00 |
|
|
Tip #0 For DHC2000 Torch.
Identified by a smooth barrel. For use in welding materials up to 1.5m (1/16″). 20-22 gage steel.
This tip is included with the purchase of a DHC 2000 Torch Kit.
Manufactured with pride in the USA by Cobra Torches
|
26.00 |
|
|
DHC 2000 Welding & Cutting Torch
This professional torch kit comes with everything needed for welding, brazing and cutting almost any material.
KIT INCLUDES:
DHC2000 torch body
Five welding tips (#0, #.5, #1, #2 and #3)
Tip Cleaner
Wrench
Check valves
Over cutter attachment (The overcutter curves over the welding tip to provide a PULL cut. It is used when cutting mild steel from 1/8″ – 1″. Also includes a guide wheel assembly for a steady hand while making long straight or pattern cuts. The rails can be staggered to perform angle or bevel cuts. They fit both the undercutter and the overcutter.
Under cutter attachment (Undercutter attaches under the welding tip for cutting thin sheet metal. This is generally referred to as a PUSH cut. It is used for cutting 28-16 gage 1/64″ – 1/16″ material.)
Instructional manual
Ron Fournier's "How to Gas Weld Aluminum" DVD!
Manufactured with pride in the USA by Detroit Torch.
Please Note:
Torch kit and accessories are not available for shipment to the following countries: Australia, Sweden, New Zealand. Thank you for your understanding.
Torch kit has AMERICAN threads.
|
450.00 |
|
|
Metal Shaping Books & DVDs
Instructional books and films from top Metal Shaping industry experts!
|
|
|
Hands-on Metal Shaping Workshops
Traditional English metal shaping & fabrication techniques taught by seasoned professionals.
|
|
|
We're pleased to announce our 2016 Workshop schedule, below. Save by enrolling in multiple classes! 5% off any 2 workshops, 10% off any 3
workshops. Enrollment must be received at the same time, for the same person.
Metal Fabrication Workshop
March 21–23, 2016, Mon - Wed
May 23–25, 2016, Mon - Wed
July 24–26, 2016, Sun – Tues {coordinates with July Advanced Workshop}
Aug 15–17, 2016, Mon - Wed
Sept 19–21, 2016, Mon - Wed
Nov 6–8, 2016, Sun – Tues {coordinates with Nov Advanced Workshop}
Enroll
Welding Workshop
March 24, 2016, Thurs
July 27, 2016, Wed
Sept 22, 2016, Thurs
Nov 9, 2016, Wed
Enroll
Advanced Metal Fabrication Workshop
July 28–30, 2016, Th - Sat
Nov 10–12, 2016, T - Sat
Enroll
FOURNIER ENTERPRRISES | 800-501-3722 or 586-323-9160
|
|
|
Two additional workshops just added to our 2015 Schedule!
Metal Fabrication Workshop, April 8, 9, 10 (Wed-Fri) and
Welding Workshop, April 24th (Friday)
|
|
|
Dues to COVID restrictions please call us for wwelding workshop availability in 2021. Apologies for any inconvenience.
WELDING WORKSHOP TUITION
is $350 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $100 deposit will hold your reservation. Balance is due 30 days prior to the workshop.
Select desired Welding Workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include hotel suggestions and a map to assist you with travel plans.
If you choose to make a reservation with a check or money order, the deposit amount is $100 (per person) which is applied to workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $50 refund.
Students must be 18 years of age or older to attend workshops; Full payment must be received 30 days prior to class.
Complete workshop information can be viewed HERE
|
100.00 |
|
|
Due to COVID restrictions please call us for class availability in 2021. Apologies for the inconvenience.
WORKSHOP TUITION IS $1,000 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $300 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
300.00 |
|
|
Due to COVID restrictions please call ud for availability. Apologies for the inconvenience.
Course prerequisite: we require that the student attend Metal Fabrication Workshop 1 prior to attending the Advanced Workshop. It is also essential that the student has practiced the skills taught in the first workshop in order to gain maximum benefit from the course.
WORKSHOP TUITION IS $1,200 per person. Processing this order online will complete your deposit and hold a space in your desired workshop. If the workshop dates are listed in the menu, it is OPEN. This $400 deposit will hold your reservation. Balance is due the first day of class.
Select desired workshop dates from drop down menu above, please.
Reservation Guidelines:
Reservations are accepted on a first come, first serve basis, and may not be "held" over the phone.
We will mail a confirmation of your enrollment within 48 hours of our receipt of this form and deposit. Your confirmation packet will include your book, DVD, hotel suggestions and a map to assist you with your travel plans.
If you choose to make a reservation with a CHECK / MONEY ORDER: We require a check or money order in the amount of $300 (per person) which is applied to your workshop tuition. Mailing address: 17 N Rose, Ste A, Mt. Clemens, MI 48043
Due to the limited number of reservations available, in the event that you cancel your reservation less than thirty (30) calendar days prior to the scheduled workshop, your deposit is NONREFUNDABLE AND NONTRANSFERABLE.
If you cancel your reservation with more than thirty (30) calendar days prior to the scheduled workshop, you will receive a $200 refund.
Students must be 18 years of age or older to attend workshops.
Complete workshop information can be viewed HERE
|
400.00 |
|
| |
|