|
|
Gas Welding supplies and equipment
Gas-welding (commonly called oxyacetylene welding or oxy-fuel welding) is one of the oldest welding processes, and is the preferred method for joining non-structural aluminum panels.
|
|
|
Essential hand tools for Metal Shaping
Metal fabrication requires a variety of measuring, layout, clamping and shaping tools. We selected some of the best, to make your metal shaping project happen!
|
|
|
A T dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded dolly.
Zinc plated for long life and beautiful finish, with handy 1/4" hole for storage.
Used for building tanks or forming scratch built body parts. Can be hand-held or placed in a vice.
Small: 1/2" dia. x 4" long, 11.5 oz.
MADE IN USA
|
20.76 |
|
|
A T-dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded dolly.
Zinc plated for long life and beautiful finish, with handy 1/4" hole for storage.
Used for building tanks or forming scratch built body parts. Can be hand-held or placed in a vice.
LARGE: 1" dia. x 8" long, 3 lbs.
MADE IN USA
|
32.50 |
|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
An extra-heavy duty post makes this hefty tool perform exceptionally well as a hand-held dolly. At the same time, it multi-functions like a traditional T-dolly.
The Handy T is especially helpful when working with a large piece of metal that requires a curved edge. It's also perfect when working in tight or confined spaces. We've found the Handy T invaluable in our shop for hood scoop projects and any time 're-forming' is needed (for example, around weld areas.)
MADE IN USA
|
29.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
We're pleased to announce our 2016 Workshop schedule, below. Save by enrolling in multiple classes! 5% off any 2 workshops, 10% off any 3
workshops. Enrollment must be received at the same time, for the same person.
Metal Fabrication Workshop
March 21–23, 2016, Mon - Wed
May 23–25, 2016, Mon - Wed
July 24–26, 2016, Sun – Tues {coordinates with July Advanced Workshop}
Aug 15–17, 2016, Mon - Wed
Sept 19–21, 2016, Mon - Wed
Nov 6–8, 2016, Sun – Tues {coordinates with Nov Advanced Workshop}
Enroll
Welding Workshop
March 24, 2016, Thurs
July 27, 2016, Wed
Sept 22, 2016, Thurs
Nov 9, 2016, Wed
Enroll
Advanced Metal Fabrication Workshop
July 28–30, 2016, Th - Sat
Nov 10–12, 2016, T - Sat
Enroll
FOURNIER ENTERPRRISES | 800-501-3722 or 586-323-9160
|
|
| |
|