|
|
John Glover has done a tremendous job of describing and illustrating techniques refined and perfected over a lifetime of unparalleled metal shaping successes in The Practical Sheet Metal Worker.
The book is divided into sections that include working the edges of metal parts, like beading, forming a wire edge and turning a flange. There is also a wealth of information on shrinking, tucking and heat shrinking. A section on making louvers is particularly helpful. The 'finishing touches' described in the book can enhance any metal shaping project, from basic to very advanced. Happily, John covers metal fabrication details and fine points in true English form - with excellent clarity and exquisite attention to detail.
Antique race cars, motorcycle gas tanks, aircraft parts and many other projects are all covered. Readers will enjoy John's perspective and personal touch along with intriguing information from days gone by. It’s full of valuable information about the hand forming of metal parts used in restoration, prototype, race and custom cars.
|
26.75 |
|
|
Sheet Metal Machines
Traditional metal shaping machines like bead rollers, planishing hammers, brakes and English wheels are essential sheet metal shop equipment.
|
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Made in USA
|
180.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Please note:
If you order optional Foot Operated Shrinker Stand (SSF2005) with this tool, we will not incude handle unless requested at the time of order.
MADE IN THE USA, by LANCASTER
|
180.00 |
|
|
The QuickSpaper Mark II combines a 32" throat English wheel with multiple workstations to perform a variety of essential metal shaping tasks!
Multi-Station Work Center designed by Ron Fournier...
The QuickShaper is a multitask metal working machine designed for metal work professionals and hobbyists alike. Ideal for small shops, where space - & time - are at a premium. The QuickShaper™ Mark II combines a 32" throat English wheel, with multiple workstations to perform...
Every essential metal shaping task:
Hammering / Blocking to pre-form custom aluminum or steel parts;
Wheeling and raising metal panels;
Shrinking or stretching;
Planishing - Perfect for small to medium sized parts like motorcycle tanks, hood scoops, fender flares and door skins. Now, even large parts are easily accommodated on this deeper throat wheel!
Every craftsman deserves flexibility and options to enhance creativity...
Our mobile forming center fits comfortably into small workspaces and is easily navigated around the shop. A variety of tasks may be performed right at the work station and the well-planned design provides convenient storage for forming accessories. It includes a generous 32" throat English wheel, and the upper wheel and anvil can be turned 90° to shape larger parts, as needed.
The QuickShaper provides an effective way to quickly form custom shapes in aluminum & steel. It's a multitask tool that enhances productivity for truly professional results!
Features:
32" English wheel ~ foot activated.
The upper portion of the QuickShaper is a 32" throat English wheel with 90 degree rotation feature for shaping larger parts and panels;
Quick release cam mechanism on the upper anvil.
Benefit: when placed back into operating position, the original pressure setting is immediately reestablished for streamlined shaping and efficiency;
6 forming anvils standard for a well equipped English wheel. Anvils are CNC'ed & polished;
Anvil Dimensions:
Each anvil is 2" wide x 2-½" in diameter with pressed-in sealed bearings and a ½" steel axle. Anvils are individually numbered 0 - 5, indicating the amount of crown, as follows:
#0, Completely flat, no crown
#1, 3/4" contact area
#2, 1/2" contact area
#3, 3/8" contact area.
#4, 1/4" contact area
#5, 1/8" contact area
Upper wheel:
The upper wheel is 2" wide x 4-1/2" in diameter. It also has pressed-in sealed bearings and a 1/2" steel axle. This upper wheel comes highly polished (nearly a mirror finish), which will produce parts with a beautiful surface.
Built for longevity and quality results:
Anvils are 8620 steel with deep case harden .015"-.020", 58-60 HRc
Custom lower storage area for extra forming heads, tools and equipment. Storage area accommodates storage of up to six Fournier forming heads around the perimeter of the tray;
Larger storage holes in upper tray to accommodate a variety of hammers & mallets of every size;
QuickShaper design summary:
Multi-Station design for efficient work space use and enhanced productivity;
Designed & manufactured by experts for maximum quality metal shaping results!
Made with pride in the USA;
Delivered assembled (less casters), ready for use.
Also includes EVEN MORE equipment you need for a complete metal shaping station:
Foot operated Lancaster Shrinker with interchangeable Lancaster Stretcher jaw;
Classic Bowl Forming Head;
Shot Bag 12" (unfilled);
2-¾" Plastic Bossing Mallet (# FBM02);
2-¾ Hickory Barrel Mallet (# MUM00);
Hard Wood Flat Slapper w/ leather face (# FFS001);
90 minute instructional DVD, Blocking & Smoothing, by Ron Fournier (# BSD00)
Review Set Up Instructions
WHEN ORDERING, PLEASE NOTE:
This equipment ships via motor freight only. The shipping charge for this item is ESTIMATED to be $300. (for destinations within the continental United States) Actual shipping is based on a variety of factors and will be calculated once your order is placed. Factory charges $50 crate fee, which is noted on the details of your shipping estimate.
You will be contacted with actual shipping prior to shipment and billed for shipping, separately.
QuickShaper Mark II # FQSM2
SHIPS TRUCK FREIGHT, 665 lbs., class 85
Price does not include sales tax, if applicable. (MI residents, 6%)
QuickShaper Mark II # FQSM2
|
5500.00 |
|
|
English wheels for metal shaping
We offer full-size, bench top and kits so that you can find the perfect English wheel for your metal shaping project!
|
|
|
BENCH MOUNT ENGLISH WHEEL
We are often asked for an affordable bench top wheel, and are pleased to offer this model. It's an affordable version for the home hobbyist or race enthusiast. Perfect for the custom shop in need of an extra shaping station that won't eat up a ton of space. This pre-welded unit arrives painted and completely finished as shown.
26-1/2" overall throat depth
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1680.00 |
|
|
SET INCLUDES:
Metal Shaping Blocking & Smoothing Techniques;
Bucks, Patterns and Forms;
Gas-Welding Aluminum.
These classic metal work videos provide thorough instruction and demonstration on three of the cornerstones of quality metal work: English wheel techniques, Gas-Welding skills and Buck Building.
If you are planning a custom metal work project, these tapes provide valuable help and inspiration!
#FEV03D, DVD SET by Ron Fournier
|
76.00 |
|
|
Unwelded Standard Bench Mount English Wheel Kit
Kit Includes all machined parts, cut to length frame material, detailed step by step instructions and blueprints. A great value, especially if you have fabrication skills!
The photo above is Mittler Benchtop wheel that we built for the shop with a custom made stand. We needed an additional wheel that was high quality and didn't take up too much space. If you're looking for the same type of wheel look no further!
Upper wheel is 7" x 2"
6 Heat treated anvils (2-1/2" dia. x 2" wide) included:
Flat;
12" Radius w/ 3/4" Flat;
8-1/2" Radius w/ 1/2" Flat;
5" Radius w/ 3/8" Flat;
3-1/4" Radius w/ 1/4" Flat;
2-3/8" Radius w/ 1/8" Flat
MADE IN USA
|
1450.00 |
|
|
This unique design from MetalAce is a great mid-sized wheel. It is well suited for heavy forming, and yet sized to fit perfectly in small shops. The 3-leg design includes rubber feet for a steady grip on all floors, while the retractable handle and tip-back casters allow easy mobility. A great on-the-go metal forming machine; perfect for racing needs, coachbuilding, hot-rod building, vintage aircraft restoration, and sculpture work. The sturdy jack mechanism offers a quick-release anvil yoke and precision alignment adjusters. The easy to use alignment adjusters make quick work of truing the anvil to the top wheel, as well as offsetting the lower anvil for reverse curve and edging operations.
The MetalAce 30F Classic Series English Wheel is made in the USA with pride, using heavy wall tubular construction. The machine is powder-coated for a professional, durable finish.
INCLUDES:
(6) 3 inch wide anvil wheels: Flat, 2.5, 3.75, 6.0, 12.0, and 24.0 inch radii
(1) 8 x 3 inch upper wheel
Warranty: 1 year manufacturer's warranty
#MA30F, MADE IN USA
WHEN ORDERING, PLEASE NOTE:
This equipment ships via truck freight. The shipping charge for this item will be ESTIMATED during checkout. Actual shipping is based on a variety of factors and will be verified once your order is placed. You will be contacted with actual shipping prior to shipment and billed separately, if necessary.
SHIPS TRUCK FREIGHT, 373 lbs., class 85
Price does not include sales tax, if applicable (MI residents, 6%).
|
3400.00 |
|
| |
|