An extra-heavy duty post makes this hefty tool perform exceptionally well as a hand-held dolly. At the same time, it multi-functions like a traditional T-dolly.
The Handy T is especially helpful when working with a large piece of metal that requires a curved edge. It's also perfect when working in tight or confined spaces. We've found the Handy T invaluable in our shop for hood scoop projects and any time 're-forming' is needed (for example, around weld areas.)
MADE IN USA
A T dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded dolly.
Zinc plated for long life and beautiful finish, with handy 1/4" hole for storage.
Used for building tanks or forming scratch built body parts. Can be hand-held or placed in a vice.
Small: 1/2" dia. x 4" long, 11.5 oz.
MADE IN USA
A T-dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded dolly.
Zinc plated for long life and beautiful finish, with handy 1/4" hole for storage.
Used for building tanks or forming scratch built body parts. Can be hand-held or placed in a vice.
LARGE: 1" dia. x 8" long, 3 lbs.
MADE IN USA
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed.
These can also be used as regular hole punches by not using the flare forming ring.
Anti-friction bearings are included with purchase.
AUTOMOTIVE PUNCH & BEAD TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
MADE IN THE USA
Just drill a pilot hole for the draw bolt and then apply the tool and tighten. The finished hole is smooth and has a stengthening bead.
Use in Mittler Bench Presses with spring loaded center pin and just center punch, no drilling needed. These can also be used as regular hole punches by not using the flare forming ring. Anti-friction bearings are included with purchase.
PUNCH & BEAD TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4""
2"
2-1/2"
3"
MADE IN THE USA
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
Eckold Metal Forming Tools
Eckold tools are available for shrinking, stretching, doming, planishing, flattening, straightening, flanging, notching, punching and edging of sheet metal parts!