|
|
Punch and Flares / Punches
Automotive Punch and Flare tools made in the USA!
|
|
|
Metal Finishing
Weld finishing and final planishing are achieved with some of the metal working "tools of the trade"
|
|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
Now ON SALE: Save 20%
4 Piece Metalworking Set is a must have for anyone working on metal projects that require drilling, chiseling, punching and mounting hardware! All tools are Professional Mechanics Grade Quality and can deliver 3,500 PSI on the intended target.
SET INCLUDES
High Speed Steel Center Punch
Combo Prick Punch/Center Punch
Self-Centering Center Punch
5/16" Cold Steel Chisel
all in a Hard Storage Case.
|
38.00 |
|
|
Includes two Fournier classics!
METAL WORK BASICS: Hand Tools and
METAL WORK BASICS: Large Equipment
HAND TOOLS
A comprehensive overview to the "Hand Tools" of the Trade!
This film covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
LARGE EQUIPMENT
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier title!
Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
180 min. total #FEV02, DVD Set by Ron Fournier
|
59.50 |
|
|
Now in one easy step you can flare sheet metal panels for improved strength & appearance.
Flare Tools Part #: 1300-F-Series
Product Description Flare sheet metal panels for improved strength and appearance.
Flare tool guide ring centers tooling in your pre-cut hole then draw together with supply bolt.
Easily mounts in our Mittler Brothers Bench Presses.
SET OF 9 FLARE TOOLS INCLUDES:
1/2" Flare Tool, Part # 1300-001
5/8" Flare Tool, Part # 1300-002
3/4" Flare Tool, Part # 1300-003
1" Flare Tool, Part # 1300-004
1-1/4" Flare Tool, Part # 1300-005
1-1/2" Flare Tool, Part # 1300-006
1-3/4" Flare Tool, Part # 1300-007
2" Flare Tool, Part # 1300-008
2-1/2" Flare Tool, Part # 1300-009
A $425 VALUE! (Flares may also be purchased individually, please call to order)
MADE IN THE USA
|
370.00 |
|
|
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 7 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
|
860.00 |
|
|
Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Punch & Flare tools can also be used as a hole punch, simply by using the punch & die.
PUNCH & FLARE TOOL KIT OF 6 SIZES INCLUDES:
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
Anti friction bearings are included.
MADE IN THE USA
View: Optional punch/flare setup using a bench press.
|
720.00 |
|
|
Simple and quick to use!
Just drill a pilot hold for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step;
Punch hole only by removing female flare ring and use punch and die;
Easily mounts into Mittler Brothers bench presses;
Features
Automotive (standard) punch and flare tools are designed to punch the required hole size and follow with a 45-degree radius angle (leg length of ¼") in metal thickness of .040” to .065” aluminum and mild steel.
The total clearance after the punch/flare is made will be 1/8” larger than the punch size. (e.g. 1” OD punch will enlarge to 1-1/8” OD after punch/flare.)
Punch to die clearance is 0.012”
Anti friction bearings are included.
ONE SIZE: 1" punch and flare tool
MADE IN THE USA
View: Optional punch/flare setup using a bench press
|
120.00 |
|
| |
|