|
|
This MANUAL bead roller uses the same heavy-duty billet aluminum frame and components as found in the Mittler Brothers Power Drive Bead Roller.
Features Include:
Heavy duty billet aluminum frame construction;
Adjustable depth of bead;
Oillite bushings at all rotation points for long life;
Heat treated gears for years of trouble free operation;
1-1/8" throat height;
Hand crank for manual operation;
NOTE: This machine does not include bead rolls - they must be purchased separately.
This unit can be quickly & easily converted to a Power Bead Roller when production demand increases by bolting on the electric motor, controls, and foot pedal! When you are ready to upgrade, request P/N 200-302 for the Manual to Power BR Conversion Motor/Electrical Kit. Kit Price $350.00 as of 08/2014.
Ship weight 56 lbs.
Made in the USA
|
850.00 |
|
|
Metal Finishing
Weld finishing and final planishing are achieved with some of the metal working "tools of the trade"
|
|
|
Bolts into existing holes on 24" Bead Rollers (210-24, 210-24NV, 210-24M, 202-24, 202-24NV)
Supports Material While You Work
Folds Up & Out Of The Way When Needed
Includes Drill Hole Pattern & Instructions to Drill Support Holes for 36" Bead Rollers (200-36, 200-36NV, 202-36, 202-36NV)
38” L x 20” W
Bead roller and stand NOT included.
|
280.00 |
|
|
What do you do if you have a car with a fender that is damaged beyond repair, or missing? Ron shows how to use the opposite fender to design a buck, pointing out the features required to make a new fender that perfectly mirrors the model. You will see him analyze a '36 Ford fender, determine the number of pieces to make it from, and exactly where to place the seams to accommodate the intricate details, including the running board bulge and the rolled edge of the wheel opening.
A fascinating, in-depth look at the start-to-finish construction of a challenging project!
119 min., #1000-24
|
40.00 |
|
|
SPEED UP CUSTOM SHEET METAL FABRICATION
24" Planishing Hammer w/ 9 Radius Anvils Includes & Features:
Rear adjuster sets load force and allows for fast die changes.
Rugged tubular construction.
9 Lower Radius Anvils Included Standard: Flat, 3/4", 1-1/2", 2", 3", 4", 6", 8", and 12".
Foot pedal operation allows both hands free to be on your work!
PRO TIPS:
> Be sure to use low air pressure for 'smoothing' your metal work, and use slightly higher air pressure when 'shaping' your project.
> To avoid leaving marks on your metal, always select a die that closely matches the shape you are forming or smoothing for best results.
MADE IN THE USA
|
1100.00 |
|
|
MOTORCYCLE METAL FABRICATION: from Sheet to Street
Watch master metal fabricator Ron Fournier create custom motorcycle sheet metal parts from scratch, including construction of an aluminum tank, fairing and front fender in this comprehensive film.
Also featured is step-by-step fabrication of the bike's entire rear section which includes the fender, sides and seat pan. Each step and every technique is clearly demonstrated in a manner that shows the viewer how to make custom parts of their own design.
The entire metal shaping process is detailed with thorough explanations & helpful tips to 'de-mystify' metal working magic. From pattern to finished product - Ron explains custom metal work - the result is professional and ready for paint. Armed with fundamental metal shaping knowledge, some essential tools - and a few "tricks of the trade", you can take your next project from sheet to street!
Demonstration & Instruction on:
Project Planning
Pattern Development
Buck Design & Fabrication
Annealing
Blocking and Smoothing
Metal Shaping using an English wheel
Shrinking & Stretching
Heliarc Tack-Welding & Gas Welding
Tips on Final Trim & Fit
Metal Finishing
Over 3-1/2 hours of metal working instruction in this 2 DVD SET!
|
60.00 |
|
|
High Throat Variable Speed Bead Roller
Rigid steel frame
4" High Throat Depth for Extra Clearance
Accurately Aligned Shafts
Hardened Drive Gears
Both Shafts Driven
Forward / Reverse Switch
Variable Speed Foot Pedal Operated (included)
Large selection of optional bead roll profiles, available separately
MADE IN USA
|
1050.00 |
|
|
24" Industrial Variable Speed Bead Roller
24" Throat Depth
Billet aluminum frame
1-1/8" Throat Height
Variable speed foot pedal operated
Adjustable depth of bead
Forward / Reverse switch
100+ optional bead roll profiles
Oilite bushings for long life
Speed range adjustment knob
Made in USA
|
1800.00 |
|
|
A huge variety of bead rolls for use with all standard (1-1/8" throat) Mittler Brothers Bead Rollers! These rolls will fit models #: 210-24, 210-24NV, 200-36, 200-36NV, 200-42 AND 210-24M.
Select options from menu, above. "Standard" shape rolls are $65. Other optional rolls vary, as indicated next to roll description.
All bead rolls are Made in USA
|
75.00 |
|
|
Beading machines are one of the most widely-used tools for both amateur and professional metalworkers. These machines can quickly and accurately make beads, steps, grooves, flanges, curls, and many other shapes in sheetmetal panels. As common as these machines are, many people don't know how to make the best use of them, and this program contains a wealth of knowledge about die selection, machine adjustment, and the proper techniques used to make crisp and accurate features in panels.
You'll see several different beading machines (bead rollers) in action, from bargain priced entry-level machines, through classic vintage machines, to the most versatile and robust motor-driven machines made today; giving you a good overview of the machines currently available, and showing which features are most important for specific types of work. Ron's easy-to-follow descriptions, coupled with the striking close-up photography will go a long way toward helping you master these versatile machines!
97 min., #1000-31
|
40.00 |
|
| |
|